TS10-36CM-0-N-12EY PRESSURE CONT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-36CM-0-N-12EY (5123317) is a screw-in, cartridge-style, pilot-operated, spool-type proportional pressure reducing/relieving valve. This valve is designed to be infinitely adjustable across a specified range using a variable electric input, with the regulated pressure being directly proportional to the input electrical current. When current is applied to the valve coil, it allows flow from port 2 to port 1 until sufficient pressure at port 1 opens the pilot section by offsetting the solenoid force. Once the predetermined pressure at port 1 is reached, the valve shifts to restrict inlet flow at port 2, regulating pressure at port 1 and relieving from port 1 to port 3. Without current, it relieves at approximately 100 psi. The TS10-36CM-0-N-12EY features standard coils of 12 and 24 volts and offers optional waterproof E-Coils rated up to IP69K for enhanced durability in harsh environments. It fits into an industry common cavity and includes an optional manual override for added control flexibility. The valve supports a maximum flow rate of 56.8 lpm (15 gpm) and operates efficiently with mineral-based or synthetic fluids possessing lubricating properties within a viscosity range of 7.4 to 420 cSt. It boasts significant durability with less than 5% performance degradation over one million cycles under specified conditions. The operating fluid temperature ranges vary based on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. Additionally, it can withstand a maximum operating contamination level of ISO cleanliness code of 18/16/13 and offers corrosion protection for up to 960 hours in salt spray tests per ASTM B117 standards. The unit weighs approximately 0.21 kg (0.47 lb) and requires specific installation torques for both cartridge installation and coil nut application for optimal performance.