***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-36C-0-N-00 (Material Number: 5122602) is a screw-in, cartridge style, pilot-operated, spool-type proportional pressure reducing/relieving valve. This versatile component is designed to be infinitely adjustable across a prescribed range using a variable electric input, with regulated pressure being proportional to the input electrical current. The valve operates by allowing flow from port 2 to port 1 when current is applied to the valve coil until sufficient pressure at port 1 opens the pilot section. It then shifts to restrict inlet flow at port 2, thus regulating pressure at port 1 and relieving port 1 to port 3 if necessary. With no current applied, it relieves at approximately 100 psi. Key features include standard 12 and 24 volt coils with optional waterproof E-Coils rated up to IP69K, an industry-common cavity design, and an optional manual override. It supports a pressure rating of up to 241.3 bar (3500 psi) for ports 1 and 2, while port 3 can handle up to 68.9 bar (1000 psi). The adjustable pressure range varies depending on the model code: from 6.9 to 206.8 bar for Model Code A, from 6.9 to 158.6 bar for Model Code B, and from 6.9 to 117.2 bar for Model Code C. The TS10-36C-0-N-00 offers a flow rating of up to 56.8 lpm (15 gpm) and maintains less than a five percent performance degradation over one million cycles under specific conditions. It also boasts robust corrosion protection withstanding up to a 960-hour salt spray as per ASTM b117 standards and can operate within various fluid temperature ranges depending on seal material used. This valve is suitable for use with mineral-based or synthetic fluids possessing lubricating properties and can accommodate fluid viscosities ranging from 7.4 to over 420 cSt while maintaining cleanliness levels as per ISO standards.