TS10-36B-0-N-00 PRESSURE CONTROL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-36B-0-N-00 (5122601) is a screw-in, cartridge-style, pilot-operated, spool-type, proportional pressure reducing/relieving valve. It can be infinitely adjusted across a prescribed range using a variable electric input, with regulated pressure proportional to the input electrical current. When current is applied to the valve coil, it allows flow from port 2 to port 1 until sufficient pressure at port 1 opens the pilot section by counteracting the solenoid force. Upon reaching the predetermined pressure, the valve shifts to restrict inlet flow at port 2 and regulates pressure at port 1 while also relieving from port 1 to port 3. Without current, it relieves at approximately 100 psi. This model features standard 12 and 24-volt coils with optional waterproof E-Coils rated up to IP69K. It fits an industry-common cavity and offers an optional manual override. The TS10-36B-0-N-00 operates with pressures up to 241.3 bar (3500 psi) for ports 1 and 2 and up to 68.9 bar (1000 psi) for port 3. Its proof and burst pressures are rated at 249.9 bar (3625 psi) and 758.4 bar (11000 psi), respectively. The adjustable pressure range varies depending on the model code: from 6.9 to either 206.8 bar (3000 psi), 158.6 bar (2300 psi), or 117.2 bar (1700 psi). It supports a flow rating of up to 56.8 lpm (15 gpm) with a maximum pilot flow of about 0.02 lpm under specific conditions. This valve is designed for durability with less than a five percent performance degradation over one million cycles under certain conditions and boasts corrosion protection of up to a 960-hour salt spray per ASTM B117 standards. It operates within fluid temperatures ranging from -40\u00b0C to as high as +204\u00b0C depending on seal type and is compatible with various fluids having viscosities between 7.4 and 420 cSt while maintaining an ISO contamination level of up to18/16/13 per ISO4406 standards.