TS10-36CM-8T-N-12DG PRESSURE CONT.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-36CM-8T-N-12DG (5122214) is a versatile screw-in, cartridge-style valve designed for proportional pressure reducing and relieving applications. This pilot-operated, spool-type valve allows for infinite adjustment across a specific range through variable electric input, with regulated pressure directly proportional to the input electrical current. The TS10-36XX model operates by allowing flow from port 2 to port 1 when current is applied to the valve coil, until sufficient pressure at port 1 triggers the pilot section. Once the predetermined pressure is reached, the valve restricts inlet flow at port 2 and regulates pressure at port 1 while also relieving port 1 to port 3. In scenarios where no current is applied, it relieves at approximately 100 psi. Key features include standard 12 and 24-volt coils, optional waterproof E-Coils rated up to IP69K, industry-standard cavity compatibility, and an optional manual override. The TS10-36CM-8T-N-12DG can handle pressures up to 241.3 bar (3500 psi) at ports 1 and 2 and up to 68.9 bar (1000 psi) at port 3. It has a proof pressure of 249.9 bar (3625 psi) and a burst pressure of up to 758.4 bar (11000 psi). The adjustable pressure range varies by model code: Model A ranges from 6.9 to 206.8 bar (100 to 3000 psi), Model B from 6.9 to 158.6 bar (100 to 2300 psi), and Model C from 6.9 to 117.2 bar (100 to 1700 psi). The valve supports a flow rating of up to 56.8 lpm (15 gpm) with a maximum pilot flow of only about .02 lpm (.08 gpm). It boasts less than a five percent performance degradation over one million cycles under specified conditions and offers robust corrosion protection withstanding up to a thousand hours of salt spray per ASTM B117 standards. Operating fluid temperatures vary based on seal type: -40\u00b0C to +100\u00b0C with Buna N seals, -26\u00b0C to +204\u00b0C with fluorocarbon seals, and -54\u00b0C to +107\u00b0C with polyurethane seals; storage temperature ranges from -40\u00b0C to +70\u00b0C while ambient temperature matches this range during operation.