TS10-36CM-0-N-24DG PRESSURE CONTROL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-36CM-0-N-24DG (Material Number: 5122110) is a screw-in, cartridge-style, pilot-operated, spool-type proportional pressure reducing/relieving valve. It allows for precise control of pressure by adjusting across a set range using variable electric input. The regulated pressure corresponds proportionally to the electrical current applied. This valve facilitates fluid flow from port 2 to port 1 until the pressure at port 1 is sufficient to counteract the solenoid force, which then opens the pilot section. When the predetermined pressure is reached, it restricts inlet flow at port 2 and regulates the pressure at port 1 while also relieving excess pressure from port 1 to port 3 when necessary. Without any current applied, it relieves at approximately 100 psi (6.9 bar). Standard features include compatibility with both 12 and 24-volt coils and optional waterproof E-Coils rated up to IP69K. The valve fits industry-standard cavities and offers an optional manual override. It boasts a maximum operating pressure of up to 241.3 bar (3500 psi) for ports 1 and 2 and up to 68.9 bar (1000 psi) for port 3, with proof and burst pressures of up to 249.9 bar (3625 psi) and 758.4 bar (11000 psi), respectively. The adjustable pressure range varies based on model code configurations: A (6.9 to 206.8 bar), B (6.9 to 158.6 bar), C (6.9 to 117.2 bar). With a cycle life ensuring less than a five percent performance degradation over one million cycles, it operates efficiently across fluid temperatures from -40\u00b0C to +100\u00b0C with Buna N seals or wider ranges with other seal options. Installation specifications include a VC10-3 cavity requirement with cartridge installation torque between 32.5 and 35.3 N-m and no orientation restrictions during setup, making it versatile for various applications requiring precise hydraulic control.