DZ6DP2-5X/150XYM
Manufacturer: Bosch Rexroth
Material #: R900437452
Model : DZ6DP2-5X/150XYM
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/150XYM (R900437452) is a direct operated pressure sequence valve designed for the precise control of hydraulic system sequencing. This model maintains the functionality of connecting a secondary system in a pressure-dependent manner, with the sequencing pressure being adjustable through various types of settings.
In its default state, this valve is held closed by a compression spring that keeps the control spool in its initial position, effectively blocking flow. When the pressure in channel P rises to overcome the spring setting, the spool shifts to allow fluid communication from P to A, enabling the connected system to operate without any drop in channel P's pressure.
The DZ6DP2-5X/150XYM offers flexibility in receiving control signals either internally from channel P or externally via port BX. Depending on its application, it can also discharge leakage oil either externally through port TY or internally through A. Users should note that internal leakage oil discharge will increase the set cracking pressure by the amount present in channel A.
For situations requiring reverse flow from A to P, an optional check valve can be integrated into the design. Monitoring and adjusting sequencing pressure is made convenient with a dedicated pressure gauge connection.
This Bosch Rexroth valve supports subplate mounting and adheres to international standards with its porting pattern compatible with DIN form A (without locating hole) and ISO (with locating hole). Subplates are available as separate orders. The valve comes in various sizes and component series X, with maximum operating pressures and flow rates specified per model.
Adjustment types for this sequence valve include options such as a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, or a simple rotary knob with scale. These features provide users with precise control over system operations while ensuring ease of use and maintenance.
$860.00 USD
More are expected on April 23, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 23, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R901362051
$3,132.00 USD
R900768947
$1,715.00 USD
R901387582
$46,626.00 USD
R901311888
$2,005.00 USD
R900484674
$1,279.00 USD
