DZ6DP1-5X/75Y/12
Manufacturer: Bosch Rexroth
Material #: R900430443
Model : DZ6DP1-5X/75Y/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP1-5X/75Y/12 (R900430443) is a high-quality, direct operated pressure sequence valve designed for controlling the sequence of hydraulic circuits. This model ensures a pressure-dependent connection of a second system by setting the sequencing pressure through an adjustable type. The valve features a robust compression spring that maintains the control spool in its initial position, keeping the valve blocked until the pressure in channel P reaches the set value of the spring.
Once this set pressure is achieved, the control spool shifts to allow flow from P to A, activating the connected system without causing any pressure drop in channel P. The DZ6DP1-5X/75Y/12 can receive control signals either internally from channel P or externally via port B X. It provides flexibility in terms of leakage oil discharge, which can be managed externally through port T Y or internally via A.
The design also considers potential enhancements; an optional check valve can be installed for free return flow from A to P, and a pressure gauge connection is available for monitoring sequencing pressure directly at the valve. This model adheres to industry standards with its subplate mounting design and porting patterns that align with DIN form A (without locating hole) and ISO (with locating hole). Customers should note that subplates are ordered separately.
This Bosch Rexroth valve comes with various adjustment types including rotary knobs (standard or lockable with scale), threaded pins with hexagon and protective caps, and optional check valves. It supports maximum operating pressures up to bar levels specified by its component series X and accommodates maximum flow rates measured in liters per minute. The DZ6DP1-5X/75Y/12 represents reliable engineering for precise hydraulic control in complex systems.
$836.00 USD
More are expected on April 18, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 18, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R901325829
$2,691.00 USD
R978912329
$5,050.00 USD
R901040947
$421.00 USD
R900749486
$1,876.00 USD
R900933212
$3,500.00 USD
