DZ6DP1-5X/150XM
Manufacturer: Bosch Rexroth
Material #: R900592961
Model : DZ6DP1-5X/150XM
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP1-5X/150XM (R900592961) is a direct operated pressure sequence valve designed to enable pressure-dependent connection of a second system. This valve operates by utilizing an adjustable compression spring which maintains the control spool in its initial position, effectively blocking the valve. When the pressure in channel P meets the set value of the compression spring, the control spool shifts, allowing for an open connection from P to A without causing a pressure drop in channel P.
The versatile DZ6DP1-5X/150XM can receive its control signal internally from channel P or externally via port BX. It also offers flexibility in managing leakage oil discharge, which can be executed externally through port TY or internally via A. However, it's important to note that with an internal discharge setup, the set cracking pressure increases due to the pressure present in channel A.
For systems requiring free hydraulic fluid return flow from channel A back to channel P, an optional check valve can be installed. Additionally, a pressure gauge connection is available for monitoring sequencing pressure directly at the valve.
This model is designed for subplate mounting and complies with porting patterns according to DIN form A (without locating hole) as standard and ISO with locating hole for specific ordering requirements. Subplates are available as a separate order item. The DZ6DP1-5X/150XM offers various optional adjustment types including a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale.
With its robust design, this valve supports maximum operating pressures up to 315 bar and maximum flow rates up to 150 l/min. The component series X signifies its range within Bosch Rexroth's product lineup. Users have access to multiple customization features tailored to their specific application needs while maintaining optimal hydraulic performance and reliability.
$860.00 USD
More are expected on February 20, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as February 20, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R900510625
$1,127.00 USD
R901279991
$2,427.00 USD
R978910059
$780.00 USD
R901278780
$675.00 USD
R978875676
$789.00 USD
