Manufacturer: Bosch Rexroth
Material #: R901070699
Model : UPE5-1X/4,00A10VSO10ANT-H-1-025
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth UPE5-1X/400A10VSO10ANT-H-1-025 (R901070699) is a sophisticated drive module that boasts an integrated design, combining an electric motor and a hydraulic pump without the need for a coupling. This compact construction ensures minimal length of the pump-motor group, enhancing space efficiency in various applications. The pump operates by drawing hydraulic fluid from a tank through a suction tube and delivering it to the hydraulic control system. The returning fluid can be cooled via oil-air cooler connections, ensuring optimal operating temperature for both the hydraulic fluid and electric motor.
Equipped with an axial fan wheel, this drive module ensures that fresh air cools the system effectively. Maintenance features include an easily accessible filling plug for the tank, an oil level display for monitoring, and a securely closed tank cover to which both the pump-motor group and terminal box are attached. This product arrives ready for connection, streamlining installation processes.
For users seeking additional functionality, options include electric oil level and temperature monitoring as well as comprehensive hydraulic controls such as filters, accumulators, and valves. Other customizations may include oil-water cooling systems, double pumps, or extra tanks to meet specific requirements.
The UPE5-1X/400A10VSO10ANT-H-1-025 is designed with safety in mind but does require caution due to heat generation during operation which could pose a risk of injury. It can be augmented with IHB control modules for complete hydraulic controls tailored to individual needs. These modules are versatile and can be mounted in various ways depending on application demands.
In summary, this drive module offers low noise operation, high cooling capacity, and is suitable for a wide array of applications due to its compact design and readiness for connection. Its versatility is further enhanced by the availability of numerous variants and mounting options that allow it to perform efficiently across different operational environments while providing the potential for complete hydraulic control integration upon request.
$18,888.00 USD
More are expected on May 21, 2026
Note: Sales tax, shipping, and applicable tariffs will be calculated at checkout.| Qty | Price | Savings |
|---|---|---|
| 5-24 | $18,415.80 USD | $472.20 USD |
| 25+ | $17,943.60 USD | $944.40 USD |
Status: This product is temporarily out of stock.
Qty: Delivered as early as May 21, 2026 when ordered in
Thanks to its concept, the drive module type UPE 5 can be constructed with very compact dimensions. The pump (2) is driven by means of an electric motor (1). Electric motor and pump are connected without coupling. The pump shaft is plugged into the hollow drilled shaft end of the electric motor. In this way, the length of the pump/motor group is kept to a minimum. The pump (2) sucks in the hydraulic fluid from the tank (4) through the suction tube (3) and delivers it to the hydraulic control. The hydraulic fluid flowing back from the control can be led through the oil/air cooler (5) via connections K1 and K2. The cooled hydraulic fluid than gets back into the tank. By means of the axial fan wheel (6) mounted at the electric motor, cold fresh air is sucked in through the oil/air cooler (5). In this way, the hydraulic fluid and the electric motor are cooled. The tank (4) can be filled through the filling plug (7). The oil level can be monitored by means of the oil level display (8). The tank is closed by a tank cover (9). At the cover, the pump/motor group (1; 2) and the terminal box (10) are attached. The drive module is delivered ready for connection.
Optionally, the drive module can be equipped with an electric oil level and oil temperature monitoring and a complete hydraulic control (see 51156), e.g. filter, accumulator and valves.
Upon request, oil-water cooling, oil pan according to Water Resources Act (WHG), double pump as well as an additional tank are also possible.
Attention!
The drive module may heat up during operation ⇒ Risk of injury!
Symbol for control pump (A10VSO, V7)
Symbol for displacement pump (GF2, AZ)
Mounting IH15B control module
The control modules for the UPE5 drive module serves the realization of complete hydraulic controls. They can be fitted and mounted individually.
The filter or accumulator safety module establishes the connection of the hydraulic control to port K2 of the drive module.
The IH15B control modules (in this connection see data sheet 51156) with the connection modules can be attached to the filter or accumulator safety module.
Technical data
|
Hydraulic fluid 1) |
Mineral oil HLP according to DIN 51524 part 2 | |
|
Hydraulic fluid temperature range 2) |
°C |
-10 … +70 |
|
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 3) |
Class 20/18/15 according to ISO 4406 (c) | |
|
Viscosity range |
See viscosity range of the pumps and the valves | |
|
Direction of rotation |
Right | |
|
Mass 4) |
kg |
75 |
| 1) | Please observe our provisions according to data sheet 07075! |
| 2) | Observe the admissible viscosity range of the pump and the valves! |
| 3) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
| 4) |
Without hydraulic fluid and pump. For the pump weights refer to data sheets 10089, 10213, 10515, 10522, 92712 and 92713. |
Selection table for pump and electric motor with n = 1450 rpm
|
Axial piston variable pumps |
Operating pressure |
Power |
|
pmax |
P |
|
|
bar |
kW |
|
| A10VSO10DFR1/52R-PPA14N00 | 70 | 2.2 |
| 95 | 3 | |
| 125 | 4 | |
| 220 | 2.2 | |
| 3 | ||
| 4 | ||
| A10VSO18DFR1/31R-PPA12N00 | 40 | 2.2 |
| 50 | 3 | |
| 70 | 4 | |
| 250 | 2.2 | |
| 3 | ||
| 4 |
|
Internal gear pumps |
Operating pressure |
Power |
|
pmax |
P |
|
|
bar |
kW |
|
| PGF2-2X/006RE01VE4 | 110 | 2.2 |
| 150 | 3 | |
| 200 | 4 | |
| PGF2-2X/008RE01VE4 | 90 | 2.2 |
| 120 | 3 | |
| 160 | 4 | |
| PGF2-2X/011RE01VE4 | 65 | 2.2 |
| 90 | 3 | |
| 120 | 4 | |
| PGF2-2X/013RE01VE4 | 55 | 2.2 |
| 75 | 3 | |
| 100 | 4 | |
| PGF2-2X/016RE01VE4 | 45 | 2.2 |
| 60 | 3 | |
| 80 | 4 |
|
External gear pumps |
Operating pressure |
Power |
|
pmax |
P |
|
|
bar |
kW |
|
| AZPF-1X-004RAB20MB | 180 | 2.2 |
| 245 | 3 | |
| 250 | 4 | |
| AZPF-1X-005RAB20MB | 130 | 2.2 |
| 180 | 3 | |
| 250 | 4 | |
| AZPF-1X-008RAB01MB | 90 | 2.2 |
| 120 | 3 | |
| 200 | 4 | |
| AZPF-1X-011RAB01MB | 65 | 2.2 |
| 90 | 3 | |
| 140 | 4 | |
| AZPF-1X-016RAB01MB | 45 | 2.2 |
| 60 | 3 | |
| 100 | 4 | |
| AZPF-1X-022RAB01MB | 40 | 2.2 |
| 55 | 3 | |
| 75 | 4 |
|
Vane pumps |
Operating pressure |
Power |
|
pmax |
P |
|
|
bar |
kW |
|
| PV7-10X/10-14RE01MC0-16 | 50 | 2.2 |
| 65 | 3 | |
| 90 | 4 | |
| 160 | 2.2 | |
| 3 | ||
| 4 | ||
| PV7-1X/10-20RE01MC0-10 | 35 | 2.2 |
| 50 | 3 | |
| 65 | 4 | |
| 100 | 2.2 | |
| 3 | ||
| 4 | ||
| PV7-1X/16-20RE01MC0-16 | 35 | 2.2 |
| 50 | 3 | |
| 65 | 4 | |
| 160 | 2.2 | |
| 3 | ||
| 4 | ||
| PV7-1X/06-10RA01MA0-10 | 70 | 2.2 |
| 100 | 3 | |
| 4 | ||
| 2.2 | ||
| 3 | ||
| 4 | ||
| PV7-1X/06-14RA01MA0-07 | 50 | 2.2 |
| 70 | 3 | |
| 4 | ||
| 2.2 | ||
| 3 | ||
| 4 | ||
| PV7-2X/20-20RA01MA0-10 | 35 | 2.2 |
| 50 | 3 | |
| 65 | 4 | |
| 100 | 2.2 | |
| 3 | ||
| 4 | ||
| PV7-2X/20-25RA01MA0-10 | 30 | 2.2 |
| 40 | 3 | |
| 55 | 4 | |
| 100 | 2.2 | |
| 3 | ||
| 4 |
Electric motor
The electric motor is designed for the operating mode according to VDE 0530 part 1 (EN 60034) for continuous operation S1 within the nominal power range. The electric motor complies with insulation class F and protection class IP55.
The electric motor is to be connected so that it rotates clockwise (clockwise direction of rotation).
It can be used at mains with the frequency 50 Hz or 60 Hz without changes.
Technical data electric motor
|
Voltage 1) |
U |
V |
400/690 ±6 % Δ/Y |
|
Frequency |
f |
Hz |
50 / 60 |
|
Operating mode |
S1 continuous operation | ||
|
Insulation class |
F (winding) | ||
|
Protection class |
IP55 | ||
|
Number of poles |
4 | ||
| 1) | Other voltages upon request. |
Frequency 50 Hz
|
Power |
Speed |
Power factor |
Nominal flow with |
|
|
|
cos φ |
400 V |
|
kW |
rpm |
|
A |
| 2.2 | 1440 | 0.77 | 5.2 |
| 3 | 1415 | 0.76 | 7 |
| 4 | 1390 | 0.73 | 9.8 |
Frequency 60 Hz
|
Power |
Speed |
Power factor |
Nominal flow with |
|
|
|
cos φ |
400 V |
|
kW |
rpm |
|
A |
| 2.23 | 1710 | 0.84 | 4.8 |
| 3 | 1700 | 0.83 | 6.4 |
| 4 | 1680 | 0.77 | 9.3 |
Electro-magnetic compatibility of devices (EMC)
According to the “Act on the electro-magnetic compatibility of devices (§2, subsection 4)” and Directive 89/336 EEA, the drive module is no operationally reliable device.
In order to prevent electro-magnetic interferences that might occur, an interference suppression element e.g. type 23 050, 3 x 400 VAC, 50-60 Hz by Murr-Elektronik (D-71570 Oppenweiler) is recommended.
Terminal assignment in the terminal box at the drive module
At the factory
Customer side: Δ triangle U = 400 V
Customer side: Y star U = 690 V
Oil-air cooler 1)
By means of the oil-air cooler, high power density (ratio between drive power and tank size) of the UPE 5 drive module is achieved.
In this way, the drive module with the oil-air cooler can be used in continuous operation. The maximum operating pressure of the oil-air cooler is pmax = 10 bar.
| 1) | On request, oil-water coolers are also possible! |
For applications outside these parameters, please consult us!
Sound pressure level
(measured with n = 1450 min–1, ν = 41 mm2/s and ϑ = 50 °C)
Sound pressure level for axial piston variable displacement pump A10VSO (in this connection see data sheet 92712, 92713)
Sound pressure level for internal gear pump PGF2-2X (in this connection see data sheet 10213)
Sound pressure level for external gear pump AZPF-1X/ (in this connection see data sheet 10089)
Sound pressure level for vane pump PV7-1X (in this connection see data sheet 10515)
Sound pressure level for vane pump PV7-1X (in this connection see data sheet 10522)
Sound pressure level for vane pump PV7-2X (in this connection see data sheet 10522)
Δp - qv characteristic curve
(measured with ν = 41 mm2/s and ϑ = 50 °C)
Water cooler (optional)
Water cooler on request.
Level switch (option)
The level switch is used for the electric monitoring of the hydraulic fluid filling level. If the minimum oil level is reached, the contact opens and thus gives a signal to the control.
Terminal assignment
Maximum filling level
Minimum filling level
Technical data
|
Maximum voltage |
V AC/DC |
50 |
|
Maximum current consumption |
A |
0.25 |
|
Maximum power consumption |
W |
3 |
|
Protection class |
IP65 | |
|
Contact type |
Normally closed contact | |
Temperature switch (option)
By means of the temperature switch, the drive module is protected against operation of inadmissibly high hydraulic fluid temperatures. The temperature switch has a fixedly set switching point switching at a hydraulic fluid temperature of 70 °C. The switch-back hysteresis is approx. 15 K.
The temperature switch is screwed into connection T2 in the tank.
Terminal assignment
Temperature ≤ 70 °C
Temperature > 70 °C
Technical data
|
Maximum voltage |
V |
230 |
|
Maximum current consumption |
A |
2 |
|
Protection class |
IP65 | |
|
Contact type |
Normally closed contact | |
Oil tray (option)
Material no. R901271094
Color: RAL 7035 "Light gray"
Installation variant: Horizontal mounting
Dimensions in mm
|
Filling volume |
A |
B |
C |
|
l |
mm |
mm |
mm |
| 5 | 600 | 105 | 122 |
| 10 | 600 | 205 | 122 |
Installation variant: Vertical mounting
Dimensions in mm
Installation variant: Wall mounting
Dimensions in mm
|
Pump type |
L1 |
L2 |
L3 |
| Axial piston variable pumps |
|
||
|
mm |
mm |
mm |
|
| A10VSO10DFR1/52R-PPA14N00 | 164 | 725 | 755 |
| A10VSO18DFR1/31R-PPA12N00 | 195 | 705 | 735 |
|
Pump type |
L1 |
L2 |
L3 |
| Internal gear pumps |
|
||
|
mm |
mm |
mm |
|
| PGF2-2X/006RE01VE4 | 114 | 630 | 660 |
| PGF2-2X/008RE01VE4 | 117.5 | 705 | 735 |
| PGF2-2X/011RE01VE4 | 123 | 705 | 735 |
| PGF2-2X/013RE01VE4 | 128 | 705 | 735 |
| PGF2-2X/016RE01VE4 | 133 | 705 | 735 |
|
Pump type |
L1 |
L2 |
L3 |
| External gear pumps |
|
||
|
mm |
mm |
mm |
|
| AZPF-1X-004RAB20MB | 85 | 630 | 660 |
| AZPF-1X-005RAB20MB | 86 | 630 | 660 |
| AZPF-1X-008RAB01MB | 90 | 630 | 660 |
| AZPF-1X-011RAB01MB | 95 | 630 | 660 |
| AZPF-1X-016RAB01MB | 103 | 630 | 660 |
| AZPF-1X-022RAB01MB | 115 | 630 | 660 |
|
Pump type |
L1 |
L2 |
L3 |
| Vane pumps |
|
||
|
mm |
mm |
mm |
|
| PV7-1X/10-14RE01MC0-16 | 149 | 705 | 735 |
| PV7-1X/10-20RE01MC0-10 | 149 | 705 | 735 |
| PV7-1X/16-20RE01MC0-16 | 165 | 725 | 755 |
| PV7-1X/06-10RA01MA0-10 | 101 | 630 | 660 |
| PV7-1X/06-14RA01MA0-07 | 101 | 630 | 660 |
| PV7-2X/20-20RA01MA0-10 | 135 | 705 | 735 |
| PV7-2X/20-25RA01MA0-10 | 135 | 705 | 735 |
Filling and removal quantity
Installation variant: Horizontal mounting and wall mounting
Installation variant: Vertical mounting
|
|
Filling quantity |
Removal quantity |
Removal quantity up to switching point of level switch |
|
l |
l |
l |
|
| Installation variant: Horizontal mounting and wall mounting | 23 | 4.5 | 3.5 |
| Installation variant: Vertical mounting | 26 | 3.5 | 2 |
Installation information
Necessary minimum distance to the wall for perfect cooling.
Dimensions in mm
Related Products
R901550002
$5,404.00 USD
R901500046
$4,526.00 USD
R901501085
$3,765.00 USD
R901423800
$1,495.00 USD
R901500124
$4,731.00 USD
