DZ6DP2-5X/150Y/12
Manufacturer: Bosch Rexroth
Material #: R900593511
Model : DZ6DP2-5X/150Y/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/150Y/12 (R900593511) is a precision-engineered direct operated pressure sequence valve, designed to facilitate the pressure-dependent connection of a secondary system. This valve is notable for its ability to set sequencing pressure through various adjustment types, ensuring tailored operation for specific applications. The integrated compression spring maintains the control spool in its initial position, keeping the valve blocked until the pressure in channel P reaches the set value. Once this occurs, the spool moves, allowing flow from P to A and enabling the connected system to operate without pressure drop.
The DZ6DP2-5X/150Y/12 features internal or external control signal reception options and offers flexibility in managing leakage oil discharge either externally via port T Y or internally through A. Users should be aware that internal discharge will affect cracking pressure due to channel A's influence.
For those requiring a check valve for free hydraulic fluid return from channel A to P, this model allows for an optional installation. Additionally, a pressure gauge connection is available for monitoring sequencing pressure directly at the valve.
This model adheres to stringent industry standards with porting patterns compatible with DIN form A without locating hole as standard and ISO with locating hole as per ordering information. Subplates are required but must be ordered separately. The Bosch Rexroth DZ6DP2-5X/150Y/12 offers various adjustment types including rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale or simply rotary knob with scale. With a size component series X, it can withstand maximum operating pressures up to bar levels and accommodate maximum flow rates measured in liters per minute (l/min), ensuring robust performance across a range of hydraulic applications.
$836.00 USD
More are expected on November 25, 2024
Status: This product is temporarily out of stock.
Qty: Delivered as early as November 25, 2024 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R900769614
$394.00 USD
R978910649
$411.00 USD
R901225005
$454.00 USD
R900934757
$1,875.00 USD
R900596571
$1,733.00 USD
