DZ6DP2-5X/75XYV/12
Manufacturer: Bosch Rexroth
Material #: R901358727
Model : DZ6DP2-5X/75XYV/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/75XYV/12 (R901358727) is a direct-operated pressure sequence valve designed for the precise control of hydraulic systems. This model ensures a pressure-dependent connection of a secondary system by setting the sequencing pressure via an adjustable type. The valve features a compression spring that maintains the control spool in its initial position, allowing it to be blocked until the pressure in channel P reaches the set value. Upon reaching this value, the spool moves to permit flow from P to A without causing a drop in channel P's pressure.
The DZ6DP2-5X/75XYV/12 can receive control signals either internally from channel P or externally via port BX. It offers flexibility in terms of leakage oil discharge, which can be directed externally through port TY or internally via A. Users should note that internal leakage oil discharge will result in an increased set cracking pressure due to the presence of pressure in channel A.
For applications requiring free hydraulic fluid return flow from channel A back to channel P, an optional check valve can be installed. Additionally, this model includes a pressure gauge connection for monitoring sequencing pressure directly at the valve.
This Bosch Rexroth valve is designed for subplate mounting and complies with DIN form A (without locating hole) and ISO standards (with locating hole). Subplates are available as separate orders. The unit comes with various adjustment types including rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale; all aimed at enhancing user convenience and precision. Optional features like a check valve are also available.
The DZ6DP2-5X/75XYV/12 belongs to component series X and is capable of handling maximum operating pressures up to bar levels and maximum flow rates measured in liters per minute as specified by Bosch Rexroth's product standards.
$947.00 USD
More are expected on April 28, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 28, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R901403849
$429.00 USD
R978909387
$306.00 USD
R900975493
$5,765.00 USD
R978911759
$1,164.00 USD
R978913687
$596.00 USD
