DZ6DP2-5X/210YMV
Manufacturer: Bosch Rexroth
Material #: R900705791
Model : DZ6DP2-5X/210YMV
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/210YMV (R900705791) is a direct operated pressure sequence valve designed to ensure a pressure-dependent connection of a secondary system. This valve is characterized by its ability to set sequencing pressure through various adjustment types, including rotary knobs and threaded pins with protective caps, among others. The model features a robust compression spring that maintains the control spool in its initial position, keeping the valve closed until the pressure in channel P reaches the set value of the spring. Once this pressure threshold is met, the control spool shifts to allow flow from P to A, enabling the connected system to operate without experiencing a drop in channel P's pressure.
The DZ6DP2-5X/210YMV can receive its control signal either internally from channel P or externally via port B X. It offers flexibility in terms of leakage oil discharge; it can be managed externally through port T Y or internally via A, although internal discharge will increase the cracking pressure due to channel A's pressure.
An optional check valve can be integrated for free return flow of hydraulic fluid from channel A back to P, enhancing the valve's versatility. Additionally, a pressure gauge connection allows for monitoring of sequencing pressure directly at the valve.
This model is designed for subplate mounting and conforms to DIN form A without locating hole as standard and ISO with locating hole for ordering information. Subplates are required but must be ordered separately. The DZ6DP2-5X/210YMV supports maximum operating pressures and flow rates that are determined by its size and component series designation. Optional adjustment types include lockable rotary knobs with scales and check valves for added functionality and security in various applications.
$947.00 USD
More are expected on October 14, 2024
Status: This product is temporarily out of stock.
Qty: Delivered as early as October 14, 2024 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R978893575
$457.00 USD
R961000865
$506.15 USD
R901116077
$363.00 USD
R900359970
$825.00 USD
R900959049
$1,647.00 USD
