TS10-26C-8T-N-24DG PRESSURE CONTROL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-26C-8T-N-24DG (5122554) is a versatile screw-in, cartridge-style, pilot-operated spool-type relief valve. Designed for precise pressure regulation, this valve can be infinitely adjusted across a specified range using variable electric current, with regulated pressure directly proportional to the input electrical current. It effectively blocks flow from port 1 to port 2 until sufficient pressure opens the pilot section by countering the solenoid force. Without current, it relieves at approximately 100 psi (6.9 bar). The TS10-26C-8T-N-24DG supports both 12 and 24 volt coils and offers optional waterproof E-Coils rated up to IP69K. This model fits an industry-standard cavity and includes an optional manual override for enhanced functionality. Pressure ratings for this model are robust, with a maximum of 241.3 bar (3500 psi) at port 1 and 206.8 bar (3000 psi) at port 2, while proof pressure reaches up to 344.7 bar (4000 psi). The burst pressure is rated at an impressive 827.4 bar (12000 psi) with the coil assembled. The adjustable pressure range varies based on model code: from 6.9 to 206.8 bar (100 to 3000 psi) for code A, down to a minimum of 117.2 bar (1700 psi) for code C. The valve's flow rating is up to 94.6 lpm (25 gpm), with a maximum pilot flow of 0.76 lpm (0.2 gpm). It operates effectively across various temperature ranges depending on seal type and is corrosion-protected for up to 960 hours per ASTM B117 standards. Suitable fluids include mineral-based or synthetic options with lubricating properties, accommodating viscosity ranges from 7.4 to 420 cSt. With a unit weight of just 0.25 kg (0.55 lb), installation requires specific torque settings: cartridge installation torque between 34 and 36.7 N-m (25 to 27 ft-lb), coil nut torque ranging from 9.5 to13 .6 N-m (7 to10 ft-lb), and no orientation restrictions apply during setup.