TS10-26A-6T-N-24DG PRESSURE CONTROL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-26A-6T-N-24DG (Material Number: 5122526) is a versatile, screw-in, cartridge-style, pilot-operated, spool-type relief valve. It offers infinite adjustability across a prescribed range using variable electric current, with regulated pressure proportional to the input electrical current. The TS10-26A model blocks flow from port 1 to port 2 until sufficient pressure is present at port 1 to open the pilot section by offsetting the solenoid force. Without any current applied, the valve relieves pressure at approximately 100 psi (6.9 bar). Featuring standard 12 and 24 volt coils and optional waterproof E-Coils rated up to IP69K, this valve fits an industry common cavity and includes an optional manual override. Pressure ratings for this model include a maximum of 241.3 bar (3500 psi) at port 1 and 206.8 bar (3000 psi) at port 2, with proof pressure reaching 344.7 bar (4000 psi) and burst pressure up to 827.4 bar (12000 psi) when assembled with a coil. The adjustable pressure range varies from 6.9 to 206.8 bar (100 to 3000 psi), depending on the specific model code configuration. The flow rating is set at a maximum of 94.6 lpm (25 gpm), with a maximum pilot flow of 0.76 lpm (0.2 gpm). Temperature ratings accommodate operating fluid temperatures from -40 to 100 \u00b0C (-40 to 212 \u00b0F) with buna N seals, extending higher with other seal options like fluorocarbon or polyurethane. This cartridge-style relief valve is designed for use in systems utilizing mineral-based or synthetic fluids with lubricating properties and can handle fluid viscosities ranging from 7.4 to 420 cSt while maintaining an operating contamination level of ISO code18/16/13 per ISO4406 standards. Installation specifications include a VC10-2 cavity requirement with cartridge installation torque ranging between34to36 .7N-m(25to27ft-lb). The unit weighs approximately0 .25kg(0 .55lb), featuring an internal wetted surface area of163cm\u00b2(25 .2in\u00b2).