TS10-26AM-0-N-12DG PRESSURE CONTROL

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS10-26AM-0-N-12DG (5122015) is a screw-in, cartridge-style, pilot-operated spool-type relief valve designed for precise pressure control in hydraulic systems. This valve can be infinitely adjusted across a specified range using a variable electric current, making it highly adaptable to various operational requirements. The regulated pressure is directly proportional to the input electrical current, ensuring accurate and reliable performance. The TS10-26AM blocks flow from port 1 to port 2 until sufficient pressure is present at port 1 to open the pilot section by offsetting the electrically induced solenoid force. In its default state with no current applied, the valve relieves at approximately 100 psi (6.9 bar). It features standard 12 and 24-volt coils and offers optional waterproof E-Coils rated up to IP69K for enhanced durability in harsh environments. The valve fits industry-common cavities and includes an optional manual override for added control. Pressure ratings for this model include a maximum of 241.3 bar (3500 psi) at port 1 and 206.8 bar (3000 psi) at port 2, with a proof pressure of up to 344.7 bar (4000 psi) and burst pressure reaching 827.4 bar (12000 psi). The adjustable pressure range varies by model code, offering flexibility from as low as 6.9 bar (100 psi) up to as high as 206.8 bar (3000 psi). Flow rating is set at 94.6 lpm (25 gpm), ensuring efficient operation under specified conditions. The TS10-26AM can operate across diverse temperature ranges depending on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. It supports mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt and maintains optimal performance even under challenging contamination levels per ISO standards. Installation specifications include compatibility with VC10-2 cavities, requiring cartridge installation torque between 34 and 36.7 N-m, while coil nut torque ranges from 9.5 to 13.6 N-m without any orientation restrictions during setup.