DZ6DP2-5X/25Y/12
Manufacturer: Bosch Rexroth
Material #: R900740744
Model : DZ6DP2-5X/25Y/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/25Y/12 (R900740744) is a direct operated pressure sequence valve designed to enable pressure-dependent connection of secondary systems once a set sequencing pressure is achieved. This model operates by utilizing a compression spring to hold the control spool in its initial position, effectively blocking the valve. As the pressure in channel P rises to meet the pre-set value of the spring, the spool shifts, creating an open connection from P to A, and consequently allowing the connected system to engage without inducing a pressure drop in channel P.
The valve can receive control signals either internally from channel P or externally via port B X. It also offers flexibility in managing leakage oil discharge, which can be directed externally through port T Y or internally through A. However, it's important to note that with internal leakage oil discharge, the set cracking pressure will increase due to the pressure present in channel A.
For those requiring backflow prevention, an optional check valve can be installed for unobstructed hydraulic fluid return from channel A back to channel P. Moreover, a pressure gauge connection is available for monitoring sequencing pressures directly at the valve.
This specific model is designed for subplate mounting and adheres to DIN form A standards without a locating hole as default but can also be configured according to ISO with a locating hole if specified. Subplates are ordered separately. The DZ6DP2-5X/25Y/12 comes with various optional adjustment types including rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale. The maximum operating pressure for this component series X is noted in bar units while its maximum flow capacity is measured in liters per minute (l/min).
$836.00 USD
More are expected on May 22, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as May 22, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R978902120
$535.00 USD
R900912601
$376.00 USD
R900411318
$707.00 USD
R900424274
$983.00 USD
R901230381
$2,332.00 USD
