DZ6DP2-5X/150XM/12
Manufacturer: Bosch Rexroth
Material #: R900594848
Model : DZ6DP2-5X/150XM/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/150XM/12 (R900594848) is a high-performance direct operated pressure sequence valve, designed to facilitate the pressure-dependent connection of a second system. This valve operates by using a compression spring to hold the control spool in its initial position, effectively blocking the valve. When the pressure in channel P reaches the set value of the compression spring, the control spool is actuated, opening the connection from P to A and allowing for seamless integration of the system connected to channel A without any pressure drop in channel P.
The unique feature of this valve is its capability to receive control signals either internally from channel P or externally via port BX. Depending on its application, it can also be configured for external leakage oil discharge through port TY or internally via A. However, it's important to note that with internal leakage oil discharge, there will be an increase in the set cracking pressure due to the pressure in channel A.
For those systems requiring a free hydraulic fluid return flow from channel A back to channel P, an optional check valve can be installed. Additionally, there's a provision for a pressure gauge connection which allows monitoring of sequencing pressure directly at the valve.
The Bosch Rexroth DZ6DP2-5X/150XM/12 is designed for subplate mounting and features porting patterns that comply with DIN form A standards without locating holes and ISO standards with locating holes. Customers should be aware that subplates are required but must be ordered separately. The maximum operating pressure for this component series X is denoted in bar while maximum flow rates are indicated in liters per minute (l/min). Users also have various options for adjustment types including rotary knobs (with or without scales), threaded pins with hexagon and protective cap, and lockable rotary knobs with scale.
$861.00 USD
More are expected on September 26, 2024
Status: This product is temporarily out of stock.
Qty: Delivered as early as September 26, 2024 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R900948606
$601.00 USD
R901454081
$274.00 USD
R900557762
$415.00 USD
R900512119
$1,278.00 USD
R978912159
$1,445.00 USD
