DZ6DP1-5X/75/12
Manufacturer: Bosch Rexroth
Material #: R900588706
Model : DZ6DP1-5X/75/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP1-5X/75/12 (R900588706) is a direct-operated pressure sequence valve designed for precise control in hydraulic systems. This model ensures a pressure-dependent connection of secondary systems by setting the sequencing pressure through various adjustment types. The valve features a robust compression spring that maintains the control spool in its initial position, keeping the valve blocked until the pressure in channel P reaches the set value. Once this occurs, the control spool shifts, allowing fluid from P to A without any drop in channel P's pressure.
The DZ6DP1-5X/75/12 model receives its control signal either internally from channel P or externally via port BX and disposes of leakage oil through port TY or internally via A, depending on its application. Users should note that internal leakage oil discharge will result in an increased set cracking pressure due to the pressure in channel A.
For added flexibility, an optional check valve can be installed in this model to permit free return flow of hydraulic fluid from A to P. Additionally, a pressure gauge connection is available for monitoring sequencing pressure directly at the valve itself.
This particular model is suitable for subplate mounting and follows porting patterns according to DIN form A (standard) and ISO with locating hole for secure installation. Subplates are required but must be ordered separately. The DZ6DP1-5X/75/12 valve offers various adjustment types including rotary knob options—with or without scale—a threaded pin with hexagon and protective cap, and a lockable rotary knob with scale. With its maximum operating pressure of 350 bar and flow rate up to 75 l/min, this Bosch Rexroth pressure sequence valve is engineered for optimal performance and reliability across a wide range of hydraulic applications.
$836.00 USD
More are expected on November 13, 2024
Status: This product is temporarily out of stock.
Qty: Delivered as early as November 13, 2024 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R900939324
$4,409.00 USD
R901231264
$2,412.00 USD
R900904828
$461.00 USD
R900921853
$1,425.00 USD
R900922865
$593.00 USD
