BALL NUT FEM-E-C 20X20RX3,5-3

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth FEM-E-C 20X20RX35-3 (R150217065) is a high-precision ball screw assembly designed for linear motion applications. This single nut with flange FEMEC model boasts a nominal diameter of 20 mm, a lead of 35 mm, and a right-hand thread direction. It features a flange type C, which is similar to DIN standards, and can also be provided in flange type B upon request. The nut comes equipped with standard seals and standard axial clearance, enhancing its durability and reliability in various operating conditions. The FEM-E-C 20X20RX35-3 is designed to accommodate dynamic load capacities specific to tolerance grades T7 and T5; users should refer to the correction factor for other tolerance grades as outlined in the product's technical notes. It operates efficiently within a temperature range of -10°C to +100°C, withstanding continuous operation at these temperatures while tolerating temporary peaks up to 120°C as measured on the nut's outer shell. This model is part of the Standard series in Bosch Rexroth's product lineup and falls under the Productgroup ID indicating it as a screw drive nut within ball screw assemblies. Its design allows for maximum permissible linear speeds that vary according to lead specifications – details can be found in the characteristic speed section of technical notes. With its robust construction and precise engineering, the Bosch Rexroth FEM-E-C 20X20RX35-3 offers reliable performance in linear motion systems where high accuracy and efficiency are required. The unit's static load rating, dynamic load capacity, and permissible operating temperatures are all meticulously specified to ensure optimal functionality for users seeking top-tier components for their mechanical setups.