DZ6DP2-5X/150
Manufacturer: Bosch Rexroth
Material #: R900490263
Model : DZ6DP2-5X/150
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/150 (R900490263) is a high-performance direct operated pressure sequence valve designed for efficient control in hydraulic systems. This model ensures a pressure-dependent connection of secondary systems by setting the sequencing pressure through various adjustment types. The valve operates by utilizing a compression spring that maintains the control spool in its initial position, effectively blocking flow until the pressure in channel P surpasses the set value of the spring, prompting the spool to move and open the connection from P to A.
The DZ6DP2-5X/150 allows for either internal or external control signal receipt via channel P or port BX, respectively. It also provides options for leakage oil discharge, which can be directed externally through port TY or internally via A, with an important note that internal discharge will increase the set cracking pressure due to channel A's pressure.
Moreover, this model offers versatility with optional features such as a check valve for free hydraulic fluid return from A to P and a pressure gauge connection for monitoring sequencing pressure directly at the valve. The DZ6DP2-5X/150 is designed for subplate mounting and adheres to DIN form A without locating hole standards or ISO with locating hole specifications. Subplates are available separately.
This valve comes with multiple options for adjustment types including a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale. Its size and component series X ensure compatibility across various applications, supporting maximum operating pressures up to bar levels and maximum flow rates measured in liters per minute (l/min). Customers can tailor their order according to specific requirements on these parameters as well as their choice of subplates and adjustment types.
$860.00 USD
More are expected on May 19, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as May 19, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R901081456
$1,427.00 USD
R900967129
$1,324.00 USD
R900942826
$413.00 USD
R978914965
$4,666.00 USD
R978902727
$1,178.00 USD
