DZ 6 DP2-5X/210M/12
Manufacturer: Bosch Rexroth
Material #: R978876699
Model : DZ 6 DP2-5X/210M/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ 6 DP2-5X/210M/12 (R978876699) is a high-performance direct operated pressure sequence valve designed for efficient control in hydraulic systems. This valve model is engineered to facilitate the pressure-dependent connection of a secondary system by setting the sequencing pressure through an adjustable mechanism. The robust construction includes a compression spring that maintains the control spool in its initial position, causing the valve to remain blocked until the pressure in channel P reaches the predetermined threshold set by the spring.
Once this pressure level is achieved, the control spool shifts, allowing fluid communication from P to A and enabling the connected system to operate without any drop in channel P's pressure. Users have flexibility with this model, as it accepts control signals both internally from channel P and externally via port B X. The design also accommodates different methods of leakage oil discharge—either externally through port T Y or internally via A—though it's important to note that internal discharge will affect the set cracking pressure due to channel A's influence.
For added versatility, an optional check valve can be integrated into the system for unimpeded hydraulic fluid return from A back to P. Monitoring and adjustments are made straightforward with a pressure gauge connection for checking sequencing pressure and various adjustment types available including a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, or a plain rotary knob with scale.
This Bosch Rexroth valve is intended for subplate mounting and adheres to standard DIN form A without a locating hole or ISO with a locating hole for porting patterns. Customers must order subplates separately if needed. With its wide range of customization options and robust design ensuring reliable operation under maximum operating pressures and flow rates, this model stands out as an essential component for sophisticated hydraulic applications.
$860.00 USD
More are expected on April 7, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 7, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R900410849
$612.00 USD
R900920708
$491.00 USD
R900722184
$1,970.00 USD
R900706204
$1,616.00 USD
R900926505
$1,413.00 USD
