DZ6DP2-5X/25XM
Manufacturer: Bosch Rexroth
Material #: R900494674
Model : DZ6DP2-5X/25XM
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/25XM (R900494674) is a direct operated pressure sequence valve designed for precise control in hydraulic systems. This model is engineered to facilitate the pressure-dependent connection of a secondary system by setting the sequencing pressure through an adjustable mechanism. It incorporates a compression spring that maintains the control spool in its initial position, ensuring that the valve remains blocked until the pressure in channel P reaches the set value of the spring, prompting the spool to move and open the connection from P to A.
The DZ6DP2-5X/25XM allows for either internal or external control signal reception via control lines from channel P or externally through port BX. Depending on application needs, leakage oil discharge can be managed externally via port TY or internally through A, with an increase in set cracking pressure if discharged internally due to pressure in channel A.
An optional check valve is available for integration within this model to allow free hydraulic fluid return flow from channel A back to channel P. Additionally, a pressure gauge connection is provided for monitoring sequencing pressure directly at the valve.
This particular model adheres to DIN form A without a locating hole as standard for subplate mounting but also follows ISO standards with a locating hole as per ordering specifications. Subplates are available by separate order. The DZ6DP2-5X/25XM offers various optional adjustment types including rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale. The maximum operating pressure of this component series X is rated at bar levels and it can handle maximum flow rates measured in liters per minute (l/min).
$860.00 USD
More are expected on April 21, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 21, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R978897894
$1,034.00 USD
R978916745
$1,073.00 USD
R978010607
$1,335.00 USD
R978910854
$384.00 USD
R900944000
$407.00 USD
