RV10-22C-0-N-25/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-22C-0-N-25/ (5611202) is a screw-in, cartridge-style, direct-acting, differential area poppet type hydraulic relief valve. It is specifically designed to serve as a pressure limiting device in demanding hydraulic circuits that require low hysteresis and minimal internal leakage. The valve effectively blocks flow from port 2 to port 1 until sufficient pressure at port 2 forces the poppet off its seat, allowing for smooth transitions in response to load changes. Notable features include adjustments that cannot be backed out of the valve and positive stops that prevent springs from going solid. The hardened poppet and cage ensure longevity, while optional spring ranges extend up to 241 bar (3500 psi) for rapid response to pressure surges. The RV10-22C model boasts a pressure rating of 241.3 bar (3500 psi), proof pressure of 482.6 bar (7000 psi), and burst pressure of 965.3 bar (14000 psi). Its flow rating stands at 113.6 lpm (30 gpm), with maximum internal leakage limited to five drops per minute up to 85% of the nominal setting. This relief valve can operate within a broad temperature range depending on seal material: -40 to 100 \u00b0C with buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. Additionally, the RV10-22C provides corrosion protection withstanding up to 960 hours in salt spray per ASTM b117 standards. It supports mineral-based or synthetic hydraulic fluids within a viscosity range of 7.4 to 420 cSt and maintains a maximum operating contamination level of ISO 4406 class 18/16/13. With unit weight options varying from models A through L, it fits into VC10-2 cavities requiring specific installation torques for both the cartridge and adjuster cap. Seal kits and housings are available for tailored applications.