RV10-22C-0-N-06/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-22C-0-N-06 (Material Number: 5611200) is a screw-in, cartridge-style, direct-acting hydraulic relief valve designed to function as a pressure-limiting device in demanding hydraulic circuits. This poppet-type valve features a differential area design that ensures low hysteresis and minimal internal leakage, making it suitable for applications requiring precise pressure control. It operates by blocking flow from port 2 to port 1 until the pressure at port 2 exceeds the set limit, causing the poppet to unseat and allow flow. The valve offers smooth transitions in response to load changes, enhancing its performance in common hydraulic circuits. Key features include non-backable adjustments with options A, B, and C that incorporate positive stops to prevent springs from becoming solid. The hardened poppet and cage ensure long-lasting durability, while optional spring ranges extend up to 241 bar (3500 psi). The valve also exhibits rapid response to pressure surges and fits industry-common sizes for ease of integration into existing systems. The RV10-22C model has a maximum flow rating of 113.6 lpm (30 gpm) with internal leakage limited to five drops per minute at up to 85% of the nominal setting. It can withstand pressures up to a burst rating of 965.3 bar (14,000 psi) and proof pressures of 482.6 bar (7,000 psi). The unit is compatible with mineral-based or synthetic hydraulic fluids possessing lubricating properties and supports fluid viscosities ranging from 7.4 to 420 cSt. Temperature ratings vary based on seal type: -40 to 100 \u00b0C with Buna N seals; -26 to 204 \u00b0C with fluorocarbon seals; and -54 to 107 \u00b0C with polyurethane seals. It also boasts corrosion protection compliant with GRV10-22X standards for salt spray resistance per ASTM B117 specifications. Installation requires VC10-2 cavities with specific torque settings for both cartridge installation and adjuster cap torque. Seal kits are available for various operational requirements, ensuring versatile application capabilities in hydraulic systems.