RV08-22A-6T-N-35/ RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV08-22A-6T-N-35/ (Material Number: 5601044) is a screw-in, cartridge-style, direct-acting differential area poppet type hydraulic relief valve. It is designed to serve as a pressure-limiting device in demanding hydraulic circuits that require low hysteresis and minimal internal leakage. This valve effectively blocks flow from port 2 to port 1 until the pressure at port 2 is sufficient to unseat the poppet. Key features include adjustments that cannot be backed out of the valve, a variety of pressure adjustment options including non-adjustable factory presets, and optional bi-directional pressure capabilities. The valve's construction includes a hardened poppet and cage for enhanced durability, with spring ranges available up to 248 bar (3600 psi). It offers smooth responses to pressure surges and fits an industry-common cavity size. The RV08-22A-6T-N-35/ has a pressure rating of 248.2 bar (3600 psi), proof pressure of 496.4 bar (7000 psi), and burst pressure of 1037.7 bar (16168 psi). The relief pressure is defined at a flow rate of 0.95 lpm (0.25 gpm), with nominal reseat pressure at approximately 90% of crack value. Its flow rating reaches up to 30.3 lpm (8 gpm) at maximum pressure, while maintaining maximum internal leakage at just 0.25 ml/min. This valve operates efficiently across various temperature ranges depending on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. It supports fluids that are mineral-based or synthetic with lubricating properties within a viscosity range of 7.4 to 420 cSt, adhering to an ISO cleanliness level of 18/16/13 or better. Installation requires a VC08-2 cavity with recommended torque specifications for cartridge installation between 25.8 and 28.5 N-m (19 to 21 ft-lb). The unit weighs between approximately 0.16 kg (0.35 lb) and 0.22 kg (0.47 lb) depending on configuration options chosen from A, B, C or F h types respectively.