HSV12-28M-12HT-V-12EJ SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5542166V (5542166V) is a robust hydraulic cartridge valve, specifically designed for high-pressure applications where low internal leakage is critical. This 2-way, piloted, poppet-type valve is normally closed and bidirectional, making it ideal for load holding or blocking roles in various hydraulic systems. The HSV1228X model operates by allowing flow in both directions when energized and blocking flow when de-energized. A distinctive feature of this valve is its manual override operation, which requires the manual override pin to be seated in the lower detent groove under normal conditions. For manual shifting, the operator must push down on the knob and rotate it 180 degrees in either direction. Enhanced flow can be achieved during emergencies by pulling on the knob, although this feature is intended solely for emergency use rather than continuous duty. The valve boasts a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. It offers optional coil voltages and terminations, efficient wet-armature construction, interchangeable voltage cartridges, and a unitized molded coil design. Additionally, it includes a manual override option and optional waterproof E-Coils that are rated up to IP69K. Its cost-effective cavity design along with 960-hour salt-spray rated solenoid tubes and coils further underscore its durability and reliability. All HyPerformance products including this model are rigorously tested according to NFPA specification T2.6.1 with a verification level of 90% and an assurance level of 99%.