HSV10-28-10HT-U-12ER SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5525032 (5525032) is a robust hydraulic cartridge valve designed for specialized applications where low internal leakage and load holding are critical. Known as the HSV1028X, this valve is a high-pressure, 2-way, piloted, poppet-type, normally closed, bidirectional screw-in model. It excels in blocking or holding loads securely due to its efficient design that allows flow in both directions when energized and blocks flow when de-energized. A notable feature of the HSV1028X is its manual override operation. This emergency feature requires the manual override pin to be seated in the lower detent groove for normal operation. For manual shifting, the operator must push down on the knob and rotate it 180 degrees in either direction. Pulling on the knob after this manipulation can increase flow temporarily. Designed for durability and reliability under tough conditions, this valve includes a continuous-duty rated coil and a hardened seat that ensures long life with minimal leakage. The unit's construction is enhanced with efficient wet-armature build and optional coil voltages and terminations that cater to diverse operational needs. Additionally, it features waterproof E-Coils that are rated up to IP69K standards, ensuring performance in moisture-intensive environments. The Hydraforce HSV1028X also boasts a unitized, molded coil design along with solenoid tubes and coils that are resistant to salt spray for up to 960 hours, meeting rigorous NFPA T2.6.1 specifications at both verification and assurance levels. This makes it an ideal choice for applications demanding high reliability and strict adherence to safety standards in hydraulic systems management.