HSV10-28M-10HT-U-24EG SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5524915 (5524915) is a robust hydraulic cartridge valve from Hydraforce's comprehensive line of engineered components for hydraulic systems. Specifically, the HSV1028X model is a high-pressure, 2-way, piloted, poppet-type, normally closed, bidirectional screw-in valve. It is primarily designed to serve as a load-holding or blocking valve in systems where low internal leakage is critical in both directions. The dual-directional flow capability of the HSV1028X makes it versatile; when energized, it allows flow in both directions and blocks flow when de-energized. A notable feature of this model is its manual override operation. In normal conditions (de-energized), the manual override pin must be seated in the lower detent groove. However, for manual shifting, the operator can push down on the knob and rotate it 180 degrees in either direction. Pulling on the knob after actuation allows for increased flow, although this feature is intended primarily for emergency use rather than continuous duty. The HSV1028X includes several technical enhancements that ensure reliability and durability in demanding applications. These include a continuous-duty rated coil and a hardened seat that minimizes leakage while extending service life. Additionally, it offers optional coil voltages and terminations to accommodate diverse system requirements. The efficient wet-armature construction along with unitized, molded coil design contributes to its robust performance. For environmental resilience, the waterproof E-Coils are rated up to IP69K standard protecting against ingress during high-pressure washdowns. Moreover, solenoid tubes and coils on this model are treated to withstand a 960-hour salt spray test per NFPA specification T2.6.1 standards which ensures reliability under corrosive conditions ensuring performance assurance levels at 99%.