HSV10-28M-0-N-0 SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5524895N (5524895N) is a robust hydraulic cartridge valve, specifically the HSV1028X model, engineered to serve as a load holding or blocking valve with minimal internal leakage in both directions. This 2-way, piloted, poppet-type, normally closed, bidirectional, screw-in valve is ideal for applications that demand high-pressure operation and reliability. The HSV1028X facilitates flow in both directions when energized and blocks flow when de-energized, ensuring precise control over hydraulic systems. The manual override feature of the HSV1028X provides additional operational flexibility. In normal conditions, the valve remains de-energized with the manual override pin seated in the lower detent groove. For manual operation, users can push down on the knob and rotate it 180 degrees in either direction. This feature is particularly useful for emergency interventions allowing increased flow by pulling on the knob, although it is not intended for continuous-duty operations. Designed with durability in mind, this valve includes a hardened seat to enhance its lifespan and maintain low leakage rates. Its continuous-duty rated coil and efficient wet-armature construction add to its robustness and performance efficiency. The unit's cartridges are voltage interchangeable which provides versatility across different systems. Additionally, it features optional coil voltages and terminations to cater to varied operational requirements. The waterproof E-Coils of the HSV1028X are rated up to IP69K ensuring protection against ingress of dust and high-temperature high-pressure water jets. Furthermore, this model boasts a unitized molded coil design along with solenoid tubes and coils that are resistant to corrosion with a 960-hour salt-spray rating. All HyPerformance products including this model adhere strictly to NFPA specification T2.6.1 ensuring reliability at a verification level of 90% and an assurance level of 99%.