SV10-28M-0-N-00 VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-28M-0-N-00 (5024895) is a solenoid-operated, 2-way, normally closed, bidirectional screw-in hydraulic cartridge valve. It is engineered to serve as a load holding or blocking valve in systems that demand low internal leakage in both directions. The valve features a continuous-duty rated coil and a hardened seat that ensures long life and minimal leakage. It supports various optional coil voltages and terminations, making the cartridges voltage interchangeable. Additionally, it offers a manual override option and optional waterproof E-Coils that are rated up to IP69K, suitable for harsh environmental conditions. The SV10-28M-0-N-00 can handle a pressure rating of up to 241 bar (3500 psi) and requires a minimum differential pressure of 2.8 bar (20 psid) to function effectively. Its design allows for maximum internal leakage of only 5 drops per minute at 207 bar (3000 psi). The valve operates efficiently within fluid temperature ranges from -40 to +100°C (-40 to +212°F) with Buna N seals, -26 to +204°C (-15 to +400°F) with Fluorocarbon seals, and -54 to +107°C (-65 to +225°F) with Polyurethane seals. This product is suitable for use with mineral-based or synthetic hydraulic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. It maintains performance even under maximum operating contamination levels specified by ISO 4406 standards at 20/18/14. The unit weighs approximately 0.15 kg (0.34 lb) and has an internal wetted surface area of about 129 cm² (20 in²). Installation specifications include a VC102 cavity type and recommended torque settings for cartridge installation ranging from 32.5 to 35.3 Nm (24 to 26 ft-lb), ensuring secure and reliable setup in hydraulic systems.