SV10-28-0-N-00 SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-28-0-N-00 (5024890) is a solenoid-operated, 2-way, normally closed, bidirectional screw-in hydraulic cartridge valve. This valve is specifically designed to act as a load holding or blocking valve in systems requiring low internal leakage in both directions. It features a continuous-duty rated coil and a hardened seat to ensure long life and minimal leakage. The valve supports various optional coil voltages and terminations, making the cartridges interchangeable across different voltage requirements. Additionally, it offers a manual override option and can be equipped with optional waterproof E-Coils that are rated up to IP69K, ensuring robust performance even in harsh environmental conditions. The SV10-28-0-N-00 operates effectively within a pressure rating of up to 241 bar (3500 psi) and requires a minimum differential pressure of 2.8 bar (20 psid) for proper functioning. It allows for a reseat flow of 2.8 lpm (0.75 gpm) necessary to reseat the internal poppet check balls under increasing differential pressure across a deenergized valve from zero psid maximum. The maximum internal leakage is limited to 5 drops/min at 207 bar (3000 psi). This valve can handle operating fluid temperatures ranging from -40°C to +100°C (-40°F to +212°F) with Buna N seals, -26°C to +204°C (-15°F to +400°F) with fluorocarbon seals, and -54°C to +107°C (-65°F to +225°F) with polyurethane seals. It also features corrosion protection enduring up to 960 hours of salt spray per ASTM B117 standards. Designed for use with mineral-based or synthetic hydraulic fluids with lubricating properties, the SV10-28-0-N-00 accommodates fluid viscosity ranges from 7.4 to 420 cSt and can operate up to a maximum contamination level of 20/18/14 per ISO 4406. This versatile valve fits into industry-standard VC102 cavities and does not have any orientation restrictions during installation, making it an adaptable choice for diverse hydraulic applications.