SV38-26J-0-N-24EY SOLENOID VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5011072 (5011072) is a high-performance hydraulic cartridge valve specifically designed for precise fluid control in various applications. This model, known as the SV3826, operates as a solenoid-activated, 2 port, normally closed, direct-acting needle type valve. Its primary function is to serve as a blocking or load-holding device suitable for low flow circuits. In its default state when de-energized, the SV3826 effectively blocks flow in both directions up to its pressure rating. Should the pressure at port 1 exceed this rating, the valve allows flow from port 1 to port 2. When energized, the needle point within the valve lifts, enabling bidirectional flow; however, port 2 is designated as the recommended load-holding port. This versatility makes it ideal for applications requiring reliable control over fluid transfer and containment. The SV3826 features include double-blocking capabilities which prevent flow in both directions when required and a relieving function from port 1 to port 2 that enhances its operational flexibility. Constructed with a hardened seat, the SV3826 ensures longevity and minimal leakage, crucial for maintaining system integrity and efficiency over time. It offers optional coil voltages and terminations to accommodate varying operational requirements and environments. Additionally, cartridges are voltage interchangeable which provides further adaptability and ease of use. The unitized molded coil design of the SV3826 contributes to its robustness and reliability under diverse conditions. A manual override option adds an extra layer of operational security by allowing manual operation in case of an electrical power failure or when electronic control is unavailable. Finally, its compatibility with industry common cavity sizes ensures it can be integrated into various existing systems with minimal adaptation needed.