SV08-26-0-N-24ER W/ 7004406 NUT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce 5002111 (5002111) is a solenoid-operated, 2 port, normally closed, direct-acting, needle-type, screw-in hydraulic cartridge valve. This valve is adept at functioning as a blocking or load-holding device specifically designed for low flow circuits. The SV0826 model features a design where it blocks flow in both directions when de-energized, adhering to its pressure rating. Should the pressure at port 1 exceed this rating, the valve allows flow from port 1 to port 2. Conversely, when the valve is energized, the needle point lifts to facilitate bidirectional opening of the valve, with port 2 being the recommended load-holding port. This model boasts a continuous-duty rated coil and a hardened seat which ensures long life and minimal leakage. The versatility of this valve is enhanced by its optional coil voltages and terminations which make the cartridges voltage interchangeable. The unitized, molded coil design contributes to its robustness and efficiency. It also offers a manual override option and optional waterproof E-Coils that are rated up to IP69K for superior environmental protection. Moreover, its industry common cavity ensures it fits compactly within various setups without compromising on performance or reliability. This makes it particularly suitable for applications requiring precise control over hydraulic flow with dependable durability under varied operational conditions.