Accessories for R911172534

DIGITAL OUTPUT MODULE S20-DO-16/3

Manufacturer: Bosch Rexroth

Material #: R911172534

Model : S20-DO-16/3

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth S20-DO-16/3 (R911172534) is a digital output module designed to provide reliable and efficient signal output for actuators within an automation system. This module is capable of handling 16 digital outputs with a 24 VDC, 0.5A per channel capacity, making it suitable for connecting actuators that use three-wire connection technology. The S20-DO-16/3 features a compact and modular design that allows for space-saving installation on standard top hat rails, offering flexibility and ease in setting up or modifying control cabinet configurations. Each output on the S20-DO-16/3 is short-circuit proof, ensuring robust performance and protection against potential electrical faults. This contributes to the overall durability and longevity of the system. The fast reaction times of the module enable quick response to control commands, which is critical in dynamic industrial environments where timing is essential. Additionally, the S20-DO-16/3 comes with diagnostic and status indicators that provide real-time feedback on the operation of connected devices. These indicators facilitate troubleshooting and maintenance by immediately signaling any issues that may arise during operation. The electronic device nameplate feature simplifies identification and management of the module within a control system. The use of open communication standards ensures that this IO module can be seamlessly integrated into various automation setups with maximum availability. Designed specifically for integration into an S station environment, the S20-DO-16/3 represents a blend of innovation in both assembly and installation concepts, providing users with a cost-effective solution for implementing customized machine concepts. Its robust mechanics are complemented by forced ventilated axial fans to maintain optimal operating temperatures, further enhancing its performance reliability in industrial applications.

$584.12 USD

Availability: 36 In Stock

Add to Cart

Available for immediate shipment

Qty: Delivered as early as November 25, 2024 when ordered in

This product is eligible for factory repair.

Start Repair

DIGITAL OUTPUT MODULE S20-DO-16/3

Cabinet I/O S20

The modular, compact device design of the I/O systems from Rexroth provides you with maximum flexibility for cost-effective implementation of your custom machine concepts. The I/O modules have a robust design and mechanics, Forced ventilated - Axial fan 230Vre easy to handle, have a fast reaction time and are quick to install – both in the control cabinet as well as in the field. Open communication standards allow you to perfectly integrate the I/O modules with maximum availability.

Unpacked Weight: 0.303 kg

Diagnostic and status indicators

This module is designed for use within an S20 station. It is used to output digital signals. Actuators with up to three conductors can be connected. The outputs are protected against short circuits and overload.

Innovative assembly and installation concept
Individually combinable modules
Space-saving I/O technology for top hat rail mounting
Compact, modular and simple

2D CAD	Download 2D CAD
3D CAD	Download 3D CAD

Type code extension	S20-DO-16/3
Productgroup ID	4,6
ctrlX configurator	https://www.boschrexroth.com/ctrlx-configurator/
Number of channels	16
EPLAN	https://ecad-configuration.boschrexroth.com/?rootpartnr=BOS.S20-DO-16%2F3**&downloads=true
Weight	0.303

General data

Type		S20-DO-16/3
Color		Gray
Weight	g	234
Ambient temperature (operation)		-25 °C ... +60 °C
Ambient temperature (storage/transport)		-40 °C ... +85 °C
Permissible relative humidity (operation)		5 % ... 95 % acc. to DIN EN 61131-2
Permissible relative humidity (storage/transport)		5 % ... 95 % acc. to DIN EN 61131-2
Air pressure (operation)		70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)		70 kPa ... 106 kPa (up to 3000 m above sea level)
Protection type		IP20
Protection class		III, IEC 61140, EN 61140, VDE 0140-1

Connection data

Type		S20-DO-16/3
Designation		S20 connector
Connection type		Spring-cage connection with direct plug technology
Conductor cross-section solid/flexible/AWG		0.2 mm² ... 1.5 mm² 0.2 mm² ... 1.5 mm² 24 ... 16
Stripping length	mm	8

Interface local bus

Type		S20-DO-16/3
Connection type		Bus base module
Transmission speed	MBit/s	100

Power supply to logic

Type		S20-DO-16/3
Logic voltage UBus 1)	V DC	5
Maximum current consumption from UBus	mA	120
Maximum power consumption from UBus	mW	600

1)	Via bus base module

Power supply to peripherals

Type		S20-DO-16/3
Feed to digital output modules UO	V DC	24
Maximum permitted voltage range 1)		19.2 V DC ... 30 V DC
Current consumption from UO 2)	A	8
Typical power consumption from UO 3)	mW	300
Maximum power consumption from UO 4)	W	240
Overvoltage/reverse polarity protection supply voltage		Electronic (35 V, 0.5 s) / parallel diode; with external security 5 A (only for commissioning)
Guarantee 5)	A	≤ 8

1)	Including all tolerances, including ripple
2)	Secure externally
3)	Without actuators
4)	From that, 560 mW internal losses
5)	Reverse polarity protection up to 5 A

Digital outputs

Type				S20-DO-16/3
Number of digital outputs				16
Connection type				Direct plug-in technology
Connectivity technology				2-, 3-wire technology
Nominal output voltage				24 V DC
Output current per channel			mA	≤ 500
Output current per device 1)			A	≤ 8
Nominal load	Ohmic	48 Ω; for nominal voltage	W	≤ 12
	Lamps	for nominal voltage	W	≤ 12
	Inductance	1.2 H, 48 Ω; for nominal voltage	VA	≤ 12
Signal delay upon activation			µs	≤ 100
Signal delay upon deactivation 2)			µs	≤ 100
Switching frequency				Max. 10000 per second (for minimum 50 mA load current) Max. 1 per second (for inductive nominal load) Max. 16 per second (for lamp nominal load)
Load			kΩ	≥ 10
Energy consumption				See diagram
Limited inductive cut-off voltage				UDemag = UO - 45 V (UDemag = demagnetization voltage)
Output voltage in deactivated state			V	≤ 1
Output current in deactivated state			μA	≤ 300
Behavior	For overload			Shutdown with automatic restart
Behavior	For inductive overload			Output can be destroyed
Reverse voltage protection from short pulses				Limited reverse voltage protection up to 0.5 A for 1 s
Overcurrent cutoff			A	> 0.7
Output current upon overvoltage in deactivated state			mA	< 1
Short-circuit protection, overload protection of the outputs				Electronic

1)	Secure externally
2)	With at least 50 mA load current

Error messages to the higher-level control or computer system

Type		S20-DO-16/3
Error message		Short-circuit/overload of digital outputs

Electrical isolation/insulation of the voltage ranges

Type		S20-DO-16/3
Test distance		Test voltage
5 V supply (logic)/24 V supply (peripherals)		500 V AC, 50 Hz, 1 min.
5 V supply (logic)/function earth		500 V AC, 50 Hz, 1 min.
24 V supply (peripherals)/function earth		500 V AC, 50 Hz, 1 min.

Mechanical tests

Type		S20-DO-16/3
Vibration resistance 1)	g	5
Shock 2)		25 g, 11 ms duration, semi-sinusoidal shock pulse
Continuous shock 3)	g	10

1)	Acc. to IEC 60068-2-6
2)	Acc. to IEC 60068-2-27
3)	Acc. to EN 60068-2-29

Conformity

Type		S20-DO-16/3
Conforms with
Testing of interference immunity acc. to EN 61000-6-2	Discharge of static electricity (ESD)	Criterion B; 6 kV contact discharge; 8 kV air discharge acc. to EN 61000-4-2/IEC 61000-4-2
	Electro-magnetic fields	Criterion A; field strength: 10 V/m acc. to EN 61000-4-3/IEC 61000-4-3
	Fast transients (burst)	Criterion B; 2 kV acc. to EN 61000-4-4/IEC 61000-4-4
	Transient overvoltage (surge)	Criterion B; supply lines DC: ±0.5 kV/±0.5 kV (symmetric/asymmetric) acc. to EN 61000-4-5/IEC 61000-4-5
	Line-fed disturbances	Criterion A; test voltage 10 V acc. to EN 61000-4-6/IEC 61000-4-6
Testing of disturbance transmission acc. to EN 61000-6-3	Radio disturbance characteristics	Class B acc. to EN 55022

Approvals
The current approvals can be found at www.boschrexroth.com.

Dimensions

Type		S20-DO-16/3
A	mm	53.6
B	mm	129.9
C	mm	54
Note on dimensions		The depth applies when using a support rail TH 35-7.5 (acc. to EN 60715).