DR6DP2-5X/315YM/12
Manufacturer: Bosch Rexroth
Material #: R900916212
Model : DR6DP2-5X/315YM/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DR6DP2-5X/315YM/12 (R900916212) is a direct operated pressure reducing valve designed for subplate mounting, with the capability to limit system pressure in hydraulic systems. This model, part of the component series X, is engineered to maintain a constant level of secondary pressure that is set via an adjustment type. In its default position, the valve allows unrestricted flow from channel P to channel A, while simultaneously subjecting the pressure in channel A to control via a piston area against a compression spring.
This valve features internal signal and pilot oil routing from channel A through a control line and can respond to external force effects on an actuator by adjusting the control spool against the spring, thereby connecting channel A to channel TY. This mechanism ensures that excess hydraulic fluid is discharged into the tank to maintain slight pressure increases.
The DR6DP2-5X/315YM/12 also incorporates an external leakage oil discharge through channel TY from its spring chamber and offers optional installation of a check valve for free flow back from channel A to P. Monitoring of secondary pressure is facilitated by a pressure gauge connection.
This model includes various adjustment types such as Rotary knob, Threaded pin with hexagon and protective cap, Lockable rotary knob with scale, and Rotary knob with scale. It adheres to porting patterns according to DIN form A and ISO standard with an optional locating hole. The valve supports maximum operating pressures up to bar levels and can handle maximum flow rates measured in liters per minute (l/min). An optional check valve can be added for enhanced functionality. The DR6DP2-5X/315YM/12 is suitable for applications requiring precise pressure regulation within hydraulic circuits.
$722.00 USD
More are expected on June 16, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as June 16, 2025 when ordered in
This product is eligible for factory repair.
The valve type DR 6 DP is a direct operated pressure reducing valve in 3-way version, i. e. with pressure limitation of the secondary circuit.
It is used to limit a system pressure. The secondary pressure is set via the adjustment type (4)
The valve is open in initial position. Hydraulic fluid can flow from channel P to channel A without restrictions. The pressure in channel A is simultaneously applied via the control line (6) at the piston area opposite the compression spring (3). If the pressure in channel A exceeds the value set at the compression spring (3), the control spool (2) moves to control position and keeps the set pressure in channel A at a constant level.
Signal and pilot oil come internally via the control line (6) from channel A.
If the pressure in channel A increases further due to an external force effect at the actuator, it pushes the control spool (2) even further against the compression spring (3).
In this way, channel A is connected to channel T(Y) via the control edge (8) at the control spool (2). So much hydraulic fluid is discharged into the tank that the pressure can only increase slightly.
The leakage oil discharge from the spring chamber (7) is always effected externally via channel T(Y).
For the free flow back from channel A to channel P, a check valve (5) can optionally be installed.
A pressure gauge connection (1) allows for the control of the secondary pressure.
Type DR 6 DP1-5X/.Y…
(measured with HLP46, ϑOil = 40 ±5 °C)
pA-qV characteristic curves
pA-qV characteristic curves
Notice!
The curve development is maintained if the pressure is set lower according to the pressure rating.
The characteristic curves apply to the pressure at the valve output p = 0 bar across the entire flow range.
Δp-qV characteristic curves
Δp-qV characteristic curves
|
1 |
P to A (minimum pressure differential) |
|
2 |
A to T(Y) (minimum pressure differential) |
|
3 |
Δp only via check valve |
|
4 |
Δp via check valve and fully opened control cross-section |
Version "M"
Without check valve
Version "no code"
With check valve
Dimensions in mm
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Space required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B, P, T (Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Port B without function |
|
15 |
Porting pattern according toISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 metric hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
at friction coefficient μtotal = 0.09 to 0.14,
tightening torque MA = 7 Nm] ± 10% ,
material no. R913000064
4 hexagon socket head cap screws UNC
10-24 UNC x 2” (on request)
Related Products
R900596563
$1,039.00 USD
R901312541
$434.00 USD
R901137482
$636.00 USD
R900765034
$2,864.00 USD
R978002842
$1,456.00 USD
