DZ6DP2-5X/75YM/12
Manufacturer: Bosch Rexroth
Material #: R900433356
Model : DZ6DP2-5X/75YM/12
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/75YM/12 (R900433356) is a direct operated pressure sequence valve designed for the pressure-dependent connection of a secondary system. This model features an adjustment type mechanism for setting the sequencing pressure and utilizes a compression spring to maintain the control spool in its initial position, ensuring the valve remains blocked until the set pressure value is reached. Once this pressure value is attained, the spool shifts to allow flow from port P to A without any loss of pressure in channel P.
This particular valve can receive control signals either internally from channel P or externally via port BX. Depending on its application, it can discharge leakage oil either externally through port TY or internally via A. Users should be aware that internal leakage oil discharge will result in an increased set cracking pressure due to the influence of channel A's pressure.
The DZ6DP2-5X/75YM/12 offers optional features such as a check valve for free hydraulic fluid return from A to P and a pressure gauge connection for monitoring sequencing pressure directly at the valve. It is designed for subplate mounting with porting patterns compliant with DIN form A (without locating hole) and ISO standards (with locating hole). Subplates must be ordered separately.
This model comes in various sizes and component series, capable of handling maximum operating pressures up to bar levels and maximum flow rates measured in liters per minute (l/min). The valve also provides several adjustment types including a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale; these options cater to different user preferences for controlling sequencing pressure.
$861.00 USD
More are expected on April 22, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 22, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R900924977
$2,284.00 USD
R900968646
$464.00 USD
R978908761
$1,150.00 USD
R900953239
$1,772.00 USD
R900486504
$1,237.00 USD
