| Material (profiled rail systems) | Carbon steel |
| Size diameter S5 (profiled rail systems) | 16 |
| Size N6 with tolerance (profiled rail systems) | 28,7 mm ±0,5 |
| Height of runner block | 58 |
| Footnote friction force FR | Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. |
| Size E3 (profiled rail systems) | 70 |
| Footnote permissible ambient temperature (min ... max) | 100 °C admissible for short time. For operation at lower minus temperatures, please consult us. |
| Footnote dynamic load capacity C | Determination of the dynamic load capacities and load moments is based on a 100,000 m travel as per DIN ISO 14728-1. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.23. |
| Size E2 (profiled rail systems) | 95 |
| Footnote friction coefficient μ | Without friction of seal |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Size A (profiled rail systems) | 140 |
| Size N6 tolerance (profiled rail systems) | ±0.5 |
| Size A3 (profiled rail systems) | 43.5 |
| Preload force | 20900 |
| Format | FLS - flanged, long, standard height |
| Size A2 (profiled rail systems) | 53 |
| Self-aligning for compensation of misalignments | Without self-alignment |
| Maximum permissible linear speed vmax | 4 |
| Lubrication | With preservation and without initial lubrication |
| Ball chain | Without roller chain |
| Friction coefficient μ | 0,0004 ... 0,001 |
| Pitch T guide rail | 60 |
| Size N2 (profiled rail systems) | 13.7 |
| Height of runner block with guide rail | 70 |
| Static load rating C0 | 374900 |
| Dynamic torsional moment load capacity Mt | 5100 |
| Size N6 (profiled rail systems) | 28.7 |
| Friction coefficient μ max. | 0.001 |
| Size H2 with cover strip (profiled rail systems) | 47.55 |
| Size B (profiled rail systems) | 209.65 |
| Preload class | C1 - Low preload |
| Size H2 with cover strip (profiled rail systems) | 47.85 |
| Size V1 with tolerance (profiled rail systems) | 12,6 mm ±1,2 |
| Friction force | 45 |
| Size B1 | 162.1 |
| Size H (profiled rail system) | 70 |
| Friction coefficient μ min. | 0.0004 |
| Size V1 tolerance (profiled rail systems) | ±1.2 |
| Size K2 (profiled rail systems) | 44.4 |
| Size V1 | 12.6 |
| Productgroup ID | 17 |
| Accuracy class | H - Highly accurate |
| Size K1 (profiled rail systems) | 41.25 |
| Size A1 (profiled rail systems) | 70 |
| Dynamic longitudinal moment load capacity ML footnote | Determination of the dynamic load capacities and load moments is based on a 100,000 m travel as per DIN ISO 14728-1. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.23. |
| Dynamic longitudinal moment load capacity ML | 4420 |
| Size S2 (profiled rail systems) | M14 |
| Note: Max. acceleration amax | Requirement: There must be preload, even during operation under load. |
| Static torsional moment load capacity Mt0 | 10990 |
| Runner block or guide rail | Runner block |
| Width of runner block | 140 |
| Dynamic torsional moment load capacity Mt footnote | Determination of the dynamic load capacities and load moments is based on a 100,000 m travel as per DIN ISO 14728-1. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.23. |
| Size E8 (profiled rail systems) | 74.2 |
| Length of runner block | 209.65 |
| Linear guide type | Roller rail system |
| Dynamic load capacity C | 174000 |
| Static longitudinal moment load capacity ML0 | 9520 |
| Size E9 (profiled rail systems) | 18.85 |
| Size N1 (profiled rail systems) | 18 |
| Size E1 (profiled rail systems) | 116 |
| Weight | 7.350 |
| Nominal size | 55 |
| Size H1 (profiled rail systems) | 58 |
