BALL RUNNER BLOCK CARBON STEEL KWD-035-FLS-C3-X-1

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth B.RUNNER BLOCK CS KWD-035-FLS-C3-X-1 (R16533382Z) is a ball runner block designed for linear motion and positioning applications requiring high precision and rigidity. This runner block is part of the Ball Rail Systems product line, specifically tailored for demanding rigidity requirements and reduced frictional oscillations, even under external loads. The B.RUNNER BLOCK CS boasts an extra precision accuracy class XP, high preload class C, and is made from unalloyed steel CS without a ball chain. This model features a flange width with long length and standard height (FLS format), ensuring compatibility with various guide rail sizes. The runner block body is prelubricated at the factory with Roller bearing grease Dynalub, ensuring long-term lubrication over several years. It has an overall length of . mm and offers maximum precision due to its patented entry zone that can increase travel accuracy by up to six times. The B.RUNNER BLOCK CS is equipped with metal-threaded lube fittings on all sides for easy maintenance, end-face fastening threads for various attachments, and integrated all-around sealing to protect against contaminants. Its design permits applications with just one runner block per rail, while still maintaining high rigidity in all load directions. Two additional mounting screw holes at the center enhance rigidity under liftoff and side loading conditions. An optional integrated, inductive, wear-free measuring system can be added to this model. Attachments can be mounted from both above and below the runner block, which can be used on all SN/SNO ball guide rails. It supports high load ratings in all four main directions of loading. The product also features interchangeable seals during servicing to prevent ingress of dirt or coolants, thus extending service life. Different seal options such as standard seal SS, low-friction seal LS, double-lip seal DS, front seal, FKM seal, and cover plate wiper are available depending on the environmental conditions. In summary, the Bosch Rexroth B.RUNNER BLOCK CS KWD-035-FLS-C3-X-1 (R16533382Z) offers exceptional dynamic characteristics for linear motion systems where high precision and rigidity are paramount.