| Shaft diameter d | 50 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | OE – Open, adjustable |
| Series | Super B (no self-alignment feature) |
| Dynamic load capacity C | 12500 |
| Footnote dynamic load capacity C | The load capacities apply for the main direction of loading. |
| Max. acceleration amax | 150 |
| Maximum permissible linear speed vmax | 3 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero-clearance |
| Outer diameter D | 75 |
| Static load rating C0 | 6620 |
| Footnote static load capacity C0 | The load capacities apply for the main direction of loading. |
| Size H | 50 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Breakaway force | 10 |
| Size L3 | 22 |
| Friction force | 4 |
| Size A | 132 |
| Productgroup ID | 17 |
| Permissible ambient temperature (max) | +80 |
| Permissible ambient temperature (min) | -10 |
| Size S | 13.5 |
| Size D1 with tolerance | |
| Weight | 2.655 |
| Angle α | 54 |
| Size D | 75 |
| Size E1 | 108 |
| Size E2 | 50 |
| Size E3 | 108 |
| Size E4 | 42 |
| Size H1 | 88 |
| Size H3 | 12.5 |
| Size H4 | 6 |
| Size L | 113 |
| Size M | 66 |
| Size N1 | 49 |
| Size N2 | 34 |
| Size S2 | 10 |
| Size SW | 5 |
| Size V | 12 |
| Size W | 22.5 |
