LINEAR-SET LSGO-A-50-DD

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth LINEAR-SET LSGO-A-50-DD (R106765040) is a high-quality linear motion set designed for applications requiring precise linear guidance with robust support and rigidity. This set includes a steel linear bushing and shaft, optimized for open configurations and featuring an integrated self-alignment feature. The standard precision housing is made of spheroidal graphite cast iron, ensuring durability and stability under load. The LINEAR-SET LSGO-A-50-DD comes equipped with two seals that provide protection against contaminants while maintaining low frictional drags, which are particularly relevant when the system is not under radial load. These frictional drags vary with speed and lubrication conditions. The super linear bushing A within this set is secured with a locating screw and has integrated wiper seals to further enhance its performance and longevity. Designed to accommodate a shaft diameter 'd', the product boasts impressive mechanical specifications, including a dynamic load capacity (C) that ensures reliable operation in the main direction of loading. It also has a static load rating (C), which indicates its ability to withstand static forces without deformation. The LINEAR-SET can operate within an ambient temperature range from 'min temperature' to 'max temperature', making it suitable for various working environments. It has been tested to achieve high speeds of up to 'vmax' meters per second, although the service life may be limited due to increased wear on plastic components at these higher speeds. Nonetheless, tests have shown that it can handle total travel distances ranging from 'minimum travel' meters to 'maximum travel' meters without failure. This product group ID's linear guide type is specifically designed for long guides that require additional shaft support while maintaining high rigidity levels. With a weight of only 'weight' kg, it offers an efficient solution for numerous applications where precise linear motion is critical. Its construction and design make it ideal for use in systems where maintenance of exact movement paths is essential.