BASE UNIT 120+ STS DIRECT

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth BASE UNIT 120+ STS DIRECT (3842547524) is a versatile and robust base unit designed for conveyor systems requiring a head drive with variable mounting positions. This unit is characterized by its reduced noise emission, which is achieved through the use of slide rails guided in the head drive. The installation of the drive kit can be done on either the right or left side, allowing for flexibility in motor, coupling, and flange placement. With its double-sided hexagonal hollow shaft, the BASE UNIT 120+ STS DIRECT facilitates the easy driving of parallel conveyor sections or bridges, enabling synchronous operation with other components. The ball bearings are made from non-rusting steel and are sealed on both sides with FDA-compliant grease filling, ensuring durability and compliance with health standards. The side elements of the base unit offer mounting options for holders for lateral guides or similar attachments, enhancing its adaptability to various conveyor configurations. The product group ID indicates its classification within Bosch Rexroth's product offerings. The effective sliding rail length allows for smooth operation while accommodating actual chain lengths specified by the user. The base unit's weight is calibrated to support its functionality without compromising efficiency. It comes fully assembled with fastening material included in the scope of delivery; a connector and chain guard are also enclosed. For optimal performance, recommended accessories include active or passive bridge connection kits and a synchronous drive connection kit. A drive kit is required to complete installation along with a slide rail whose length must be calculated according to size b specifications. Material information highlights include chain wheels made from PA (polyamide), PA chain guides, stainless steel ball bearings that are FDA compliant, stainless steel housing and connectors, and hexagonal shafts that vary in material based on size. This base unit is suitable for all track widths and compatible with all types of chains used within its permissible tensile force range. Its section length supports conveyance over specified distances at designated speeds, available upon request. It also includes a chain bag designed to compensate for any elongation during the service life but is not intended for reversible operation applications.