DIRECTIONAL SPOOL VALVE Z4WEH 22 E63-5X/6EG24N9DK23L

Manufacturer: Bosch Rexroth

Material #: R978912146

Model : Z4WEH 22 E63-5X/6EG24N9DK23L

$4,510.00 USD

More are expected on September 30, 2024

Add to Cart

Status: This product is temporarily out of stock.

Qty: Delivered as early as September 30, 2024 when ordered in

This product is eligible for factory repair.

Start Repair

DIRECTIONAL SPOOL VALVE Z4WEH 22 E63-5X/6EG24N9DK23L

Size 22, symbol E63, with solenoid actuation, 24 VDC

Industrial hydraulic valve in the medium performance range. Reliable switching of the oil flow direction according to hydraulic symbol

Unpacked Weight: 21.1 kg

Directional spool valve, pilot-operated Type of actuation: electro-hydraulic Functioning as shut-off through valve or shut-off short-circuit through valve P and T free flow in every spool position Porting pattern according to ISO 4401-08-08-0-05 Wet-pin DC or AC solenoids, optional Optional auxiliary operating device electrical connection as individual connection, see data sheet 23178 (central connection on request) Switching time adjustment, optional Stroke setting at main spool, optional Inductive position switch and proximity sensors (contactless)

➀	component side
➁	plate side

Spool valve
Pilot-operated
External pilot oil supply, external pilot oil return
With concealed manual override: With concealed auxiliary actuation
Maximum operating pressure 315 bar
Maximum flow 650 l/min
Component series 5X
Size 25

Data Sheet	Download Data Sheet
Manual	Download Manual

Spool symbol	Symbol E63
Max. pressure	315
Electrical connection description	Connector, 3-pole according to ANSI/B93.55M-1981 (Brad Harrison Mini-Change), with LED
Productgroup ID	9,10,11,12,13,14
Number of ports	4
Type of actuation	with solenoid actuation
Size	25
Max. flow	650
Type of connection	Sandwich plate
Connection diagram NFPA	NFPA T3.5.1 R2-2002 D08
Size_CETOP	D08
Connection diagram	ISO 4401-08-08-0-05
Supply voltage	24 VDC
Number of switching positions	2
Weight	21.1
Seals	NBR
Hydraulic fluid	HL,HLP,HETG

01	02	03	04		05		06	07	08	09	10	11	12	13	14	15	16	17	18
Z4	WEH	22		–	5X	/						K4							*

01		Z4
Type of actuation
02	electro-hydraulic	WEH
03	Size 25	22
Symbols
04	see symbols
05	Component series 50 ... 59 (50 ... 59: unchanged technical data and pin assignment)	5X
Pilot control valve
06	High-power valve (RE 23178)	6E
07	Direct voltage 24 V	G24
	Alternating voltage 230 V, 50/60 Hz	W230
	DC voltage 205 V 50/60 Hz	G2051)
	For other voltages, frequencies and electric data, see data sheet RE 23178
08	Without manual override	no code
	With manual override	N
	With concealed manual override (standard)	N9
09	External pilot oil supply, external pilot oil return	no code
	Internal pilot oil supply, internal pilot oil return (standard)	ET2)
	External pilot oil supply, internal pilot oil return	T
10	Without switching time adjustment	no code
	Switching time adjustment as supply control	S
	Switching time adjustment as discharge control	S2
Electrical connection
11	Without mating connector, individual connection with connector according to DIN EN 175301-803	K4 3)
11	For further electrical connections, see RE 23178
Spool position monitoring
12	Without position switch	no code
	Monitored spool position "a"	QMAG24
	Monitored spool position "b"	QMBG24
	Monitored spool position "a" and "b"	QMABG24
	Monitored rest position (not for valve with 2 spool positions)	QM0G24

13	No additional details	Without slash
13	Additional details	/
Stroke setting
14	Without stroke setting	no code
	Stroke setting on side A and B	10
	Stroke setting on side A	11
	Stroke setting on side B	12
	For more information, see stroke setting, mounting options
Throttle insert
15	Without throttle insert	no code
	Throttle Ø 0.8 mm	B08
	Throttle Ø 1.0 mm	B10
16	Without pressure reducing valve	no code
16	With pressure reducing valve (use for pilot pressure >210 bar)	D34)
Seal material
17	NBR seals	no code
	FKM seals	V
	Other seals on request
	Observe compatibility of seals with hydraulic fluid used.
18	Further details in the plain text	*

AC voltage mains (admissible voltage tolerance ± 10%)	Nominal voltage of the DC solenoid in case of operation with alternating voltage	Ordering code
110 V - 50/60 Hz 120 V - 60 Hz	96 V	G96
230 V - 50/60 Hz	205 V	G205

Preferred types and standard units are contained in the EPS (standard price list).

general

Size			25
Weight	Valve with one solenoid	kg	20.8
	Valve with two solenoids	kg	21.1
	Switching time adjustment	kg	0.8
	3-way pressure reducing valve	kg	0.4
	Plate for version "T"	kg	0.5
Installation position			any
Ambient temperature ranges (NBR seals)		°C	-30 … +50
Ambient temperature ranges (FKM seals)		°C	-20 … +50

hydraulic

Size				25
Maximum operating pressure	Port P	External pilot oil supply	bar	315
		Internal pilot oil supply (without pressure reducing valve)	bar	210
		Internal pilot oil supply (with pressure reducing valve)	bar	315
	Anschluss A		bar	315
	Port B		bar	315
	Port X		bar	315
	Port Y		bar	315
	Port T	with DC solenoid	bar	210
	Port T	with AC solenoid	bar	160
Maximum flow			l/min	650
Minimum pilot pressure			bar	12
Maximum pilot pressure			bar	210
Pilot volume for switching process			cm³	7.7
Hydraulic fluid 1)				see table
Hydraulic fluid temperature range (NBR seals)			°C	-30 … +80
Hydraulic fluid temperature range (FKM seals)			°C	-20 … +80
Viscosity range			mm²/s	2.8 … 500
Maximum admissible degree of contamination of the hydraulic fluid 2)				Class 20/18/15 according to ISO 4406 (c)

1)	The ignition temperature of the process and operating medium used must be over the maximum solenoid surface temperature.
2)	The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

Hydraulic fluid		Classification	Suitable sealing materials	Standards
Mineral oil		HL, HLP	NBR, FKM	DIN 51524
Fast bio-degradable hydraulic fluids				VDMA 24568
Environmentally compatible	Insoluble in water	HETG	NBR, FKM
Environmentally compatible	Insoluble in water	HEES	FKM
	Soluble in water	HEPG	NBR, FKM
Other hydraulic fluids on request

Notices!

Actuation of the manual override is only possible up to a tank pressure of approx. 50 bar. Avoid damage to the bore of the manual override! (Special tool for the operation, separate order, material no. R900024943). When the manual override is blocked, the actuation of the solenoid must be prevented! The simultaneous actuation of the solenoids must be prevented!

Switching times (= Contacting at the pilot control valve until start of opening of the control edge in the main valve and change in the pressure value by 5 %)

On

Pilot pressure			70 bar		140 bar		210 bar
Voltage type			Direct voltage	AC voltage	Direct voltage	AC voltage	Direct voltage	AC voltage
3-spool position valve (spring-centered)	Version "ET" (with throttle insert "B10")	ms	115	80	85	60	75	50
	Version "ET" (with pressure reducing valve "D3; 45 bar [650 psi]")	ms	80	80	75	65	65	50
	Version "T"	ms	50	30	50	20	50	20
2-spool position valve (spring end position)	Version "ET" (with throttle insert "B10")	ms	140	100	100	70	75	50
	Version "ET" (with pressure reducing valve "D3; 45 bar [650 psi]")	ms	125	110	95	65	75	50
	Version "T"	ms	65	45	60	40	85	55

Off

Pilot pressure			70 bar		140 bar		210 bar
Voltage type			Direct voltage	AC voltage	Direct voltage	AC voltage	Direct voltage	AC voltage
3-spool position valve (spring-centered)	Version "ET" (with throttle insert "B10")	ms	50	60	50	60	50	60
	Version "ET" (with pressure reducing valve "D3; 45 bar [650 psi]")	ms	50	85	50	85	50	85
	Version "T"	ms	50	55	50	55	50	55
2-spool position valve (spring end position)	Version "ET" (with throttle insert "B10")	ms	160	175	140	160	130	150
	Version "ET" (with pressure reducing valve "D3; 45 bar [650 psi]")	ms	150	175	120	150	110	140
	Version "T"	ms	55	110	45	100	40	95

Inductive position switch type QM: electrical connection

The electric connection is realized via a 4-pole mating connector (separate order) with connection thread M12 x 1.

electrical

Connection voltage (DC voltage)			V	24
Voltage tolerance (connection voltage)				+30 %/-15 %
Admissible residual ripple			%	≤ 10
Max. load capacity			mA	400
Switching outputs				PNP transistor outputs, load between switching outputs and GND
Pinout	1		V	24
	2, 4	Switching output	mA	400
	3	Earthing (GND)	V	0

For applications outside these parameters, please consult us!

(measured with HLP46, ϑOil = 40 ±5 °C)

Δp-qv characteristic curves – Version "E62"

Δp-qv characteristic curves – Version "E63"

E62

Version "ET"

E62

Version "T"

E63

Version "ET"

E63

Version "T"

➀	component side
➁	plate side

Inductive position switch type QM Switching logics

Version QMA

(Position switch on side B, monitored spool position of the main stage "a")

Version QMA

(Position switch on side B, monitored spool position of the main stage "a")

Version QMB

(Position switch on side A, monitored spool position of the main stage "b")

Version QMB

(Position switch on side A, monitored spool position of the main stage "b")

version QMAB

(Position switch on side A and B, monitored spool position "a" and "b")

Version QM0

(Position switch on side A and B, monitored spool position "0")

	1) No signal change at the position switch on side B with spool position "a"
	2) No signal change at the position switch on side A with spool position "b"

Version QM0

(Position switch on side B, monitored spool position of the main stage "0")

Version QM0

(Position switch on side A, monitored spool position of the main stage "0")

Type Z4WEH 22 E62-5X/6E…N9ET..

Dimensions in mm

1	Name plate complete valve
2	Name plate pilot control valve
3	Main valve➀ component side – Porting pattern according to ISO 4401-08-08-0-05➁ plate side – Porting pattern according to ISO 4401-08-08-0-05
4	Port X (G1/4) for external pilot control
5	Pressure reducing valve "D3" (to be used for pilot pressures above 250 bar)Material no.:NBR seals: R900323180FKM seals: R900323664
6	Switching time adjustment (throttle check valve, see data sheet RE 27506); dependent on supply or discharge control installation position (representation: supply control)
7	R-ring plate
8	Pilot control valve (see data sheet 23178)- Type 4WE 6 J.. at symbol E62- Type 4WE 6 Y.. at symbol E63
9	Solenoid "a" and "b" (rotatable by 90°)
10	Dimension for valve without manual override
11	Dimension for valve with manual override "N";Dimensions () for valve with AC solenoid
12	Dimension for valve with concealed manual override "N9"; dimensions () for valve with AC solenoid without manual override
13	Identical seal rings for ports A, B, P and T (main valve)
14	Identical seal rings for ports A, B, P, and T
16	Space required to remove the mating connector
17	Locking pin
18	Valve mounting boresValve mounting screws (separate order)6 hexagon socket head cap screws ISO 4762 - M12 - 10.9

Notice!

Length and tightening torque of the valve mounting screws must be calculated according to the components mounted.

Stroke setting, mounting options

Mounting options	L1	L2
Mounting options	mm	mm
Stroke setting on side A and B	94	248
Stroke setting on side A	94	-
Stroke setting on side B	-	248

The stroke of the main spool is limited by the stroke setting.

The piston stroke is shortened by untightening the lock nut (19) and clockwise rotation of the adjustment spindle (20). For this, the control chamber has to be depressurized.

Stroke 9.5 mm (1 rotation = 1.5 mm stroke)

19	Lock nut SW24
20	Adjustment spindle, internal hexagon SW6

Pilot oil supply

External pilot oil

supply: 8 closed

9 open

internal: 8 open

9 closed

pilot oil port "X" only available with Z4WEH 22 ....

Throttle insert

Use of the throttle insert (10) is necessary if the pilot oil supply in channel P of the pilot control valve is to be limited.

The throttle insert (10) is inserted in channel P of the pilot control valve.

Spool position monitoring

Inductive position switch type QM

Type Z4W.H 16
Dimensions in mm

Mounting cavity R/T-8A; 2 main ports; thread M16 x 1.5 mm

Dimensions in mm

Size	L1	L2
	mm	mm
16	82	182
25	62	215

Notice:

The dimensions are nominal dimensions which are subject to tolerances.

Mounting options:
Monitored spool position	Ordering code	Position switch on side
Monitored spool position	Ordering code	„a“	„b“	"a" and "b"
„a“	QMAG24		X
„b“	QMBG24	X
"a" and "b"	QMABG24			X
„0“	QM0G24			X

Mating connectors for valves with connector “K4”, without circuitry, standard

3P Z4

Mating connectors for valves with connector “K4”, without circuitry, standard

3P Z4

For valves with connector “K4” according to EN 175301-803 and ISO 4400, 2-pole + PE, “large cubic connector” Mating connectors for valves with one or two solenoids (individual connection)

Data sheet

Spare parts & repair

Mating connectors for valves with connector “K4”, with indicator light

3P Z5L

Mating connectors for valves with connector “K4”, with indicator light

3P Z5L

For valves with connector “K4” according to EN 175301-803 and ISO 4400, 2-pole + PE, “large cubic connector” Mating connectors for valves with one or two solenoids (individual connection)

Data sheet

Spare parts & repair

DIRECTIONAL SPOOL VALVE Z4WEH 22 E63-5X/6EG24N9DK23L

Manufacturer: Bosch Rexroth

Material #: R978912146

Model : Z4WEH 22 E63-5X/6EG24N9DK23L

More are expected on September 30, 2024

This product is eligible for factory repair.

general

hydraulic

Switching times (= Contacting at the pilot control valve until start of opening of the control edge in the main valve and change in the pressure value by 5 %)

On

Off

Inductive position switch type QM: electrical connection

electrical

(measured with HLP46, ϑOil = 40 ±5 °C)

Δp-qv characteristic curves – Version "E62"

Δp-qv characteristic curves – Version "E63"

E62

E62

E63

E63

Inductive position switch type QM Switching logics

Version QMA

Version QMA

Version QMB

Version QMB

version QMAB

Version QM0

Version QM0

Version QM0

Type Z4WEH 22 E62-5X/6E…N9ET..

Notice!

Stroke setting, mounting options

Pilot oil supply

External pilot oil

Throttle insert

Spool position monitoring

Inductive position switch type QM

Mounting cavity R/T-8A; 2 main ports; thread M16 x 1.5 mm

Notice:

Related Products

Information

Account