DZ6DP2-5X/25M
Manufacturer: Bosch Rexroth
Material #: R900567895
Model : DZ6DP2-5X/25M
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DZ6DP2-5X/25M (R900567895) is a high-performance direct operated pressure sequence valve, designed to facilitate pressure-dependent connection of a second system by setting the sequencing pressure through an adjustable type. This valve ensures that when the pressure in channel P reaches the preset value of the compression spring, the control spool moves to open the connection from P to A, enabling a connected system to operate without pressure drop.
The DZ6DP2-5X/25M model comes equipped with a robust compression spring that maintains the control spool in its initial blocked position. The control signal for this valve can be sourced internally from channel P or externally via port BX. Moreover, it offers flexibility in leakage oil discharge which can be directed either externally through port TY or internally via A, although internal discharge affects the set cracking pressure by adding the pressure in channel A.
For enhanced functionality, this valve can optionally include a check valve for unobstructed hydraulic fluid return from channel A back to P. Additionally, it features a pressure gauge connection for monitoring sequencing pressure directly at the valve.
Designed for subplate mounting, the DZ6DP2-5X/25M adheres to DIN form A without locating hole as standard and ISO with locating hole for ordering information. Subplates are available as separate orders. The valve also provides various options for adjustment types including rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale – catering to different application requirements.
This model has a maximum operating pressure bar and maximum flow rate l/min that support its use in various hydraulic applications requiring precise sequence control. The component series X designates its series version which correlates with specific performance characteristics of this model.
$860.00 USD
More are expected on April 18, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 18, 2025 when ordered in
This product is eligible for factory repair.
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1
Related Products
R978919871
$2,291.00 USD
R961000666
$215.61 USD
R900784036
$834.00 USD
R900374205
$11,303.00 USD
R978024422
$376.00 USD
