DR6DP1-5X/25Y
Manufacturer: Bosch Rexroth
Material #: R900469278
Model : DR6DP1-5X/25Y
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DR6DP1-5X/25Y (R900469278) is a direct operated pressure reducing valve designed to regulate system pressure by limiting the secondary circuit. This model operates in a 3-way version, ensuring that hydraulic fluid can freely flow from channel P to A when in the initial position. The secondary pressure is meticulously set via an adjustable type, which allows for precise control over system operations.
Incorporating a compression spring and control spool mechanism, the DR6DP1-5X/25Y maintains consistent pressure levels in channel A, even when external forces act upon the actuator. This valve's intelligent design diverts excess hydraulic fluid into the tank through channel TY, preventing undue pressure increases. Additionally, any leakage from the spring chamber is externally discharged, maintaining system integrity.
For applications requiring a free flow return from channel A to P, an optional check valve can be installed to facilitate this process. Monitoring and maintenance are made convenient with a pressure gauge connection for secondary pressure verification.
The DR6DP1-5X/25Y is engineered for subplate mounting and conforms to international standards with porting patterns according to DIN and ISO specifications. It offers various adjustment types including rotary knobs and lockable options with scales for enhanced usability. The valve comes in different sizes and component series X, capable of handling maximum operating pressures and flow rates as required by specific hydraulic applications.
Overall, this Bosch Rexroth valve stands out for its reliability and adaptability in controlling system pressures across diverse hydraulic setups while offering ease of installation and maintenance for operators.
$716.00 USD
More are expected on April 23, 2025
Status: This product is temporarily out of stock.
Qty: Delivered as early as April 23, 2025 when ordered in
This product is eligible for factory repair.
The valve type DR 6 DP is a direct operated pressure reducing valve in 3-way version, i. e. with pressure limitation of the secondary circuit.
It is used to limit a system pressure. The secondary pressure is set via the adjustment type (4)
The valve is open in initial position. Hydraulic fluid can flow from channel P to channel A without restrictions. The pressure in channel A is simultaneously applied via the control line (6) at the piston area opposite the compression spring (3). If the pressure in channel A exceeds the value set at the compression spring (3), the control spool (2) moves to control position and keeps the set pressure in channel A at a constant level.
Signal and pilot oil come internally via the control line (6) from channel A.
If the pressure in channel A increases further due to an external force effect at the actuator, it pushes the control spool (2) even further against the compression spring (3).
In this way, channel A is connected to channel T(Y) via the control edge (8) at the control spool (2). So much hydraulic fluid is discharged into the tank that the pressure can only increase slightly.
The leakage oil discharge from the spring chamber (7) is always effected externally via channel T(Y).
For the free flow back from channel A to channel P, a check valve (5) can optionally be installed.
A pressure gauge connection (1) allows for the control of the secondary pressure.
Type DR 6 DP1-5X/.Y…
(measured with HLP46, ϑOil = 40 ±5 °C)
pA-qV characteristic curves
pA-qV characteristic curves
Notice!
The curve development is maintained if the pressure is set lower according to the pressure rating.
The characteristic curves apply to the pressure at the valve output p = 0 bar across the entire flow range.
Δp-qV characteristic curves
Δp-qV characteristic curves
|
1 |
P to A (minimum pressure differential) |
|
2 |
A to T(Y) (minimum pressure differential) |
|
3 |
Δp only via check valve |
|
4 |
Δp via check valve and fully opened control cross-section |
Version "M"
Without check valve
Version "no code"
With check valve
Dimensions in mm
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Space required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B, P, T (Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Port B without function |
|
15 |
Porting pattern according toISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 metric hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
at friction coefficient μtotal = 0.09 to 0.14,
tightening torque MA = 7 Nm] ± 10% ,
material no. R913000064
4 hexagon socket head cap screws UNC
10-24 UNC x 2” (on request)
Related Products
R901195009
$1,950.00 USD
R900905595
$749.00 USD
R900581302
$495.00 USD
R978909872
$478.00 USD
R978018728
$2,227.00 USD
