ELINE LINEAR BUSHING KBC-10-DD-RT-G

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth ELINE BALL BUSHING KBC-10-DD-RT-G (R065826144) is a high-quality linear bushing designed for general requirements with compact construction and small outer dimensions. It features a shaft diameter of 10 mm and comes with two integrated wiper seals which offer protection against contaminants, thereby preventing jamming and ensuring smooth operation. The bushing is equipped with a POM ball retainer and balls made of rolling bearing steel, which contribute to its high dynamic load rating and extended service life. This linear bushing boasts reduced radial clearance, making it suitable for applications where minimal-clearance bearings are preferred. It has been pre-lubricated with Dynalub for low maintenance, and its numerous pockets serve as lubricant reservoirs to support extended lubrication intervals or even lifetime lubrication. The design includes an integrated metal retainer that is approximately 0.5 mm larger than the outer diameter of the shaft diameters ranging from 3 to 50 mm, allowing for a secure fit in the housing bore without the need for additional retention. The ELINE BALL BUSHING KBC-10-DD-RT-G offers a maximum dynamic load capacity (Cmax) based on a total travel of 100 km, which can be adjusted when considering different travel distances. It allows for high travel speeds up to 5 m/s and can operate within an ambient temperature range of -20°C to +80°C. Its closed format ensures that it remains contained within its intended space. With its straightforward press-on mounting method, installation is simple and does not require further securing measures. This product's weight is set at 0.1 kg, making it lightweight yet robust enough to handle substantial loads. The linear bushing's length and outer diameter are designed according to precise tolerances for optimal performance in various applications. Its friction force is noted at 0.3 N under no radial load conditions, indicating efficient movement with minimal resistance. In summary, the Bosch Rexroth ELINE BALL BUSHING KBC-10-DD-RT-G provides reliable linear motion control in various applications where space is limited, maintenance needs are low, and contamination protection is essential.