| Tolerance DB | +1 |
| Productgroup ID | 17 |
| Size b | 8.2 |
| Maximum operating temperature | +100 |
| Size H | 37.2 |
| Minimum operating temperature | -30 |
| Size h | 13.8 |
| Outer diameter D | 45 |
| Maximum permissible linear speed vmax | 2 |
| Operating temperature | -30 °C ... +100 °C |
| Size D | 45 |
| Size D1 | 55 |
| Tolerance h | ±0.3 |
| Static load rating C0 | 3500 |
| Footnote permissible operating temperature (min...max) | At temperatures above 100 °C, only bright metal ball transfer units without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. |
| Size s | 2.5 |
| Dynamic load capacity C | 1900 |
| Size DB | 45 |
| Footnote operating temperature max. | For temperatures over 100°C, only load balls made from bare metal without a felt seal may be used. Take into account the reduction in load capacity. Use high-temperature lubricant! Follow the instructions of the manufacturer! The existing lubricant oil may have to be washed out. |
| Note: Maximum permissible speed vmax | In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. |
| Size dW | 30.162 |
| Weight | 0.289 |
| Tolerance D | -0.25 |
| Nominal size | 30 |
