PS10-36A-8T-N-30/ SEQUENCE VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PS10-36A-8T-N-30/ (Material Number: 5620286) is a screw-in, cartridge-style, pilot-operated spool-type hydraulic sequence valve, designed for high-pressure applications. This valve features an internal pilot and external spring chamber drain. In its default state, it blocks flow from port 1 to port 2 while the spring chamber is drained at port 3. Upon reaching a specified pressure at port 1, the cartridge shifts to allow flow from port 1 to port 2 and remains in this position until the circuit pressure drops below the set threshold. The back pressure on port 3 contributes to the spring setting value, enhancing control precision. The PS10-36A-8T-N-30/ supports optional spring ranges up to 144.8 bar (2100 psi) and is built with hardened spool and cage components for extended durability. This valve can handle a maximum pressure of 344.7 bar (5000 psi) at port 1, with proof pressures of up to 482.6 bar (7000 psi) at both ports 1 and 2, ensuring robust performance under demanding conditions. It has a burst pressure rating of up to 1034 bar (15000 psi). The flow rating is set at a maximum of 56.8 lpm (15 gpm), with internal leakage capped at 82 ml/min at port 3. The PS10-36A-8T-N-30/ operates effectively across a wide temperature range depending on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. It is protected against corrosion by Type III clear zinc plating per ASTM B633 standards and can withstand up to a 960-hour salt spray test per ASTM B117 for specific models. Installation requires VC10-3 cavities with torque specifications between 32.5 to 35.3 N-m (24 to 26 ft-lb). This sequence valve is compatible with mineral-based or synthetic fluids possessing lubricating properties within a viscosity range of 7.4 to 420 cSt, maintaining operational integrity in various hydraulic systems.