PR10-32A-8T-N-15/ REDUCING VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce PR10-32A-8T-N-15/ (5616064) is a screw-in, cartridge-style, direct-acting spool type hydraulic pressure reducing/relieving valve. This component is equipped with an internal pilot and a spring chamber drain, designed specifically for secondary circuit pressure regulation in stable input flow systems. In its resting state, the PR10-32A allows bidirectional flow from port 2 to port 1, while maintaining a consistent drainage at port 3. When the predetermined pressure at port 1 is achieved, the valve shifts to block flow at port 2, effectively regulating pressure at port 1. Additionally, it can relieve pressure from port 1 to port 3 over a variable range above the set reducing pressure. The valve features non-backable adjustments and ensures that springs do not become solid during operation. Optional spring ranges are available up to 145 bar (2100 psi), and it boasts hardened spool and cage components for enhanced durability. The PR10-32A operates under various pressure ratings: up to 206.8 bar (3000 psi) for ports 1 and 2, and up to 68.9 bar (1000 psi) for port 3. It has a proof pressure of up to 517.1 bar (7500 psi) for ports 1 and 2 and a burst pressure of 1034 bar (15000 psi). The valve's flow rating is set at a maximum of 30.3 lpm (8 gpm), with internal leakage rates capped at 82 ml/min under specific conditions. Temperature-wise, it accommodates fluid temperatures ranging from -40 to +100 \u00b0C with buna N seals, -26 to +204 \u00b0C with viton seals, and -54 to +107 \u00b0C with polyurethane seals. It supports mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt. The unit weighs approximately between 0.24 kg to 0.29 kg depending on the model variant, fitting into VC10-3 cavities with specific installation torque requirements.