RV10-22H-0-N-35/35 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-22H-0-N-35/35 (5611403.35) is a screw-in, cartridge-style, direct-acting, differential area, poppet-type hydraulic relief valve. It is specifically designed for use as a pressure-limiting device in demanding hydraulic circuits that require low hysteresis and minimal internal leakage. The valve operates by blocking flow from port 2 to port 1 until the pressure at port 2 is sufficient to unseat the poppet. It ensures smooth transitions in response to loads within common hydraulic systems. Notable features include adjustments with positive stops to prevent spring solidification, a hardened poppet and cage for extended durability, and optional spring ranges up to 241 bar (3500 psi). The valve also offers rapid response to pressure surges and fits industry-common sizes. The RV10-22H model boasts a pressure rating of 241.3 bar (3500 psi), proof pressure of 482.6 bar (7000 psi), and burst pressure of 965.3 bar (14000 psi). Its flow rating reaches up to 113.6 liters per minute (30 gallons per minute), with maximum internal leakage limited to five drops per minute at up to 85% of the nominal setting. The valve can operate across various temperature ranges depending on seal material: -40 to 100 \u00b0C with Buna N seals, -26 to 204 \u00b0C with fluorocarbon seals, and -54 to 107 \u00b0C with polyurethane seals. Additional specifications include corrosion protection rated at GRV10-22X for 960 hours of salt spray per ASTM B117 standards, compatibility with mineral-based or synthetic hydraulic fluids with lubricating properties, and a fluid viscosity range from 7.4 to 420 cSt. The unit weighs approximately 0.222 kg (0.49 lb) and requires installation torque between 33.9 to 36.7 N-m for the cartridge and between 32.5 to 35.3 N-m for the adjuster cap in H-style plugs, without any orientation restrictions during installation.