RV10-22A-0-N-06/03 RELIEF VALVE

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV10-22A-0-N-06/03 (Material Number: 5611000.03) is a screw-in, cartridge-style, direct-acting hydraulic relief valve designed for demanding hydraulic circuits. This differential area, poppet-type valve serves as a reliable pressure-limiting device, featuring low hysteresis and minimal internal leakage. The RV10-22A model effectively blocks flow from port 2 to port 1 until the pressure at port 2 reaches a level sufficient to unseat the poppet, ensuring smooth transitions in response to load changes. Notable features include positive stop adjustments that prevent spring solidification and hardened poppet and cage components for enhanced durability. The valve offers optional spring ranges up to 241 bar (3500 psi) and demonstrates rapid response capabilities to pressure surges. With a pressure rating of up to 241.3 bar (3500 psi), proof pressure of 482.6 bar (7000 psi), and burst pressure of 965.3 bar (14000 psi), this valve is built for robust performance under high-pressure conditions. It supports flow rates up to 113.6 liters per minute (30 gallons per minute) with maximum internal leakage limited to five drops per minute at up to 85% of the nominal setting. Temperature ratings vary based on seal type: -40\u00b0C to 100\u00b0C (-40\u00b0F to 212\u00b0F) with Buna N seals; -26\u00b0C to 204\u00b0C (-15\u00b0F to 400\u00b0F) with fluorocarbon seals; and -54\u00b0C to 107\u00b0C (-65\u00b0F to 225\u00b0F) with polyurethane seals. The valve's corrosion protection meets GRV10-22X standards for salt spray resistance per ASTM B117. Installation specifications include compatibility with VC10-2 cavities, a cartridge installation torque range of 33.9\u201336.7 N-m (25\u201327 ft-lb), and adjuster cap torque for H-style plugs ranging from 32.5\u201335.3 N-m (24\u201326 ft-lb). This relief valve is adaptable across various applications due its robust design and versatile configuration options.